Standby
When you press
standby
blank screen is displayed for 15 minutes. You can change the
amount of time the projector stays in standby mode; see
"Standby Time" on page 30 for details. While the projector is in
standby, the keypad and remote buttons do not affect the projec-
tor and the LED lights orange.
If you press
•
standby
tor returns to normal operations immediately.
If you don't press
•
standby time.
Source (keypad only)
Comp and Video (remote only)
When you have more than one source (computer and video) con-
nected to the projector, select between them by pressing the
button on the keypad or the
source
remote. Press
comp
again to toggle among the computer sources. The sources switch
in this order:
Computer RGBHV
•
Computer VESA
•
Computer M1 Analog/Digital
•
Computer CableWizard
•
Press
again to toggle among the video sources. The video
video
sources switch in this order:
Component Video
•
Composite Video
•
S-Video
•
Volume + or -
To increase the volume, press
•
To decrease the volume, press
•
Volume adjustments are saved for each source you have con-
nected.
, the display and audio turn off and a
again within the standby time, the projec-
again, the projector turns off after the
standby
or
comp
to display your computer image. Press
.
+
-.
or
button on the
video
comp
21