AFX MOTORSPORTS CAN AM MAX X3 Installation Manual

Advertisement

SPORT ROOF RACK
Place the central bar over the Bracket aligning it with the
12
perforations, as it is shown in the image, hold it using a 1/4 x
INSTALLATION MANUAL
3/4" screw with the washer and nut. (Repeat this step on both
driver's and passenger's side)
13
Tighten all the screws to nish with the installation.
info@afxmotorsports.com
CAN AM MAX
X3
SKU CAN006-S
THIS PRODUCT IS FOR OFF ROAD USE ONLY

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CAN AM MAX X3 and is the answer not in the manual?

Questions and answers

Summary of Contents for AFX MOTORSPORTS CAN AM MAX X3

  • Page 1 SPORT ROOF RACK Place the central bar over the Bracket aligning it with the perforations, as it is shown in the image, hold it using a 1/4 x INSTALLATION MANUAL 3/4” screw with the washer and nut. (Repeat this step on both driver’s and passenger’s side) Tighten all the screws to nish with the installation.
  • Page 2 AFX Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AFX Motorsports will warranty only parts provided by AFX Motorsports.
  • Page 3 NOTE: Just in case you have the Flat Roof start from step 5. Align 3 central rails with the perforations (as it is shown in the image). Use sixteen 1/4 x 1/2” screws with nut, inserting them bottom-up. (Do not tighten yet). Central Rail Hold the front leg of the passenger´s side aligning it with the leg at the rear from the passenger´s side.
  • Page 4 Align 3 central rails with the perforations (as it is shown in the image). Use twelve 1/4 x 1/2” screws with nut, inserting them Settle the leg over the roof (Only with he Original Roof ), place bottom-up. (Do no tighten yet) a washer over the perforations as it is shown in the image, using 1/4 x 1”...

This manual is also suitable for:

Can006-s

Table of Contents