Custom Setup - InFocus LP740 User Manual

Custom setup

CUSTOM SETUP
Menu Posi
View Source
Image Mode
Power Save
Serial Set
Smooth Mode
Remote
Save Exit
Cancel
SERIAL SET
SUB MENU
Band Rate
Stop Bits
Parity
Save Exit
Cancel
SUBMENU FUNCTION
Menu Posi Adjusts the menu's position on the screen from upper-left
or right to lower-right or left
View Source Displays the active source (Computer, Video, or S-Video)
Image Mode Rear: Reverses the image for rear projection
Ceiling: Reverses the image for ceiling-mounted projection
Power Save Allows you to turn on and off 3 different power save modes.
mode 1: Shuts off the lamp after 3 hours if no keypad button
is pressed
mode 2: Shuts off the lamp after 10 minutes if no input signal
is detected
mode 3: Shuts off the fan automatically 2 minutes after the
lamp is turned off
Serial Set Sets up transmission of input signals from RS-232 control.
Band rate: 9600, 19200 bps
Stop bit: 1, 2
Parity: odd, even, no parity
Smooth Mode Smoothes the vertical lines of the image
Remote Indicates if the remote is wired to the projector
OFF ON
Submenu Rear
Submenu Ceiling
Submenu
OFF ON
Wireless Wired
Save Exit
Cancel
19200 9600
Power Save1
1 2
Power Save2
NONE EVN ODD
Power Save3
Save Exit
Cancel
IMAGE MODE
SUB MENU
OFF ON
OFF ON
POWER SAVE
SUB MENU
OFF ON
OFF ON
OFF ON
NOTE: Serial set is used for
RS-232 control from an external
device. See "RS-232 Terminal
Specifications" on page 43 for
details.
21