InFocus LP740 Specifications

Infocus lp740: specifications

Hide thumbs Also See for LP740:

Download this manual See also: User Manual, Installation Manual

RS-232 Terminal Specifications

Communication configuration

To control the LP 740 from your computer, connect the RS-232

cable and set your computer's serial port settings to match this

communication configuration:

Setting

Bits per second

Data bits

Parity

Stop bits

Start bit

Command format

All commands consist of 3 alpha characters followed by a

request, all enclosed in parentheses.

An example: (AAA####) where

Value

192000

None

(

starts the command

AAA

denotes the command

####

denotes the value to be written

(leading zeros not necessary)

)

ends the command

NOTE: To assure the projector

can process a command, wait 3

seconds before entering the next

command.

Page 1 #### Value 192000 None starts the command denotes the command denotes the value to be written (leading zeros not necessary) ends the command NOTE: To assure the projector can process a command, wait 3 seconds before entering the next command.
Page 2 Supported commands Function Power Volume Mute Track Sync Bright Resize Source Menu Zoom Point Mask Cursor Command Meaning 1=ON, 0=OFF 1=Volume Up, 0=Volume Down 1=Mute On, 0=Mute Off 1=Phase Up, 0=Phase Down 1=Sync Up, 0=Sync Down 1=Bright Up, 0=Bright Down 1=Expansion On, 0=Expansion Off 0=Computer...

Lp740b