Page 2
PRE-ASSEMBLY PREPARATION WARNING! DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT DUE TO THE POSSIBLE RISK OF FINGER ENTRAPMENT • Please read through this instruction before beginning assembly. • Two adults assembly is recommended. • Clear out the space for assembly and lay out all parts base on Parts List, extra room will allow you to easily determine if all the pieces are present.
Page 3
Step 1 Lay the Table Top (A), facedown, onto a flat, soft, clean surface. Attach the Table Leg (C) to the Table Top (A) by using 4 Bolts (D), 4 Washers (E), 4 Spring Washers (F), 4 Nuts (G) with Wrench (I). Repeat same step for attaching the remaining 3 legs to the Table Top (A).
Page 4
Step 3 Now fully and securely tighten all nuts at all joints. Add Nut Caps (H) on all bolt ends to protect skin or clothing from getting snagged. H X 8 Step 4 Stand the table right side up. Adjust the Legs pre-installed Levellers until the Table is level with the ground. Adjust height Adjust low for balance...
Page 5
Step 5 Caution: This TABLE can only be used on a flat, level surface.
Need help?
Do you have a question about the EPL1003 and is the answer not in the manual?
Questions and answers