Page 3
永阡鑫股份有限公司 [SA SANITARY CARTRIDGE FILTER HOUSING INSTRUCTION MANUAL] Notice 1. Please install and test the housing according to the product operation manual. 2. This product is designed for filter equipment used for water filtration only, please don’t use it on other purpose to avoid danger.
Page 4
永阡鑫股份有限公司 [SA SANITARY CARTRIDGE FILTER HOUSING INSTRUCTION MANUAL] 11. Please avoid rapid switching of ball valve and continuous countercurrent which may cause damage of filter while using the product. 12. Be sure to release the pressure inside the filter housing completely before replacing filter cartridges.
Page 6
永阡鑫股份有限公司 [SA SANITARY CARTRIDGE FILTER HOUSING INSTRUCTION MANUAL] Instruction Manual : a. Fix the filter on the ground or a proper board. 2. Pipe: a. Connect ⑦Base with ⑧⑨Inlet/Outlet and the main pipe. b. Install the exhaust valve and pressure gauge at ②Vent 3.
Page 7
永阡鑫股份有限公司 [SA SANITARY CARTRIDGE FILTER HOUSING INSTRUCTION MANUAL] a. If the liquid leak out, please close ⑧Inlet and unfasten ②vent to release the inner pressure. b. Unfasten ①Clamp, and fasten is again. Open ⑧Inlet, add pressure slowly and check if there is any leakage.
Need help?
Do you have a question about the SA and is the answer not in the manual?
Questions and answers