Chapter 2: Vesa / Panel Mounting; Vesa Mounting; Panel Mounting - NOVAKON X12 Series User Manual

Chapter 2. VESA Mounting

2.1 VESA Mounting

Step1. Check the VASA mount dimension on the back cover .
There are two choice : 100 x 100mm or 75 x 75 mm
Step2. Fasten the four screws to bond monitor to VESA Stand
Warning !
1. The length of VASA mount screw cannot exceed 5mm.
(Calculated from monitor's back cover)
2. Any wrong installation will cause monitor's great
damage.
3. The Spec of VASA mount screw is M4 size.
2.2 Panel mount
Accessory Kit screw (M4*30) lock wall fasteners. As shown below.
1. Screw Length Limitation: 5mm
(Calculated from monitor's back cover)
2. Screw Spec Limitation: M4 size
Page 12