ULTIMATE BODY PRESS CMP-48 Assembly Instructions

Our passion is providing high quality affordable fitness equipment that lets you get the most from your
workouts every day. We are proud to serve your gym needs and want to meet and exceed your expectations
for customer service. Satisfaction is guaranteed, please contact us if you need any assistance.
Ultimate Body Press
16 Avenue A,
Leetsdale, PA 15056-1304
FOR YOUR SAFETY: This pull up bar is designed to be mounted to wood frame ceilings with solid wood beams measuring 16
or 24 inches apart on center. This pull up bar should not be mounted to drywall alone. It is the users responsibility to choose
a secure location and properly install the pullup bar using the instructions provided. Tighten all bolts and carefully examine
your installation to ensure that the pull up bar is securely fastened in place before attempting to use the pull up bar.
Consult your physician before beginning this or any exercise program. If you experience any discomfort while using this
machine, discontinue use and consult your physician immediately.

PARTS LIST

1. Support Bracket x 2
2. Pull Up Bar
3. 16mm Allen Bolts x 2
4. Small Black Washer
5. Lag Bolts x 4
6. Large Black Washer
7. Allen Wrench

TOOLS REQUIRED

 Power Drill
 5/16 in. Drill Bit
 Socket Drive Adapter for Power Drill
(Highly Recommended)
 17mm Socket Wrench
 17mm Open Socket Wrench
CUSTOMER SERVICE / SATISFACTION GUARANTEE
support@ultimatebodypress.com
Email:
CMP-48 Ceiling Mounted Pull Up Bar
Phone Number:
877-734-7227
(M-F 9am-5pm EST)