Operations And Function; Add Water; Power On & Off; Mist Adjustment - TOPPIN Comfy Air H1 User Manual

OPERATIONS AND FUNCTION

Add Water

Remove the tank cover,
fill the water tank with
water till the Max Water
Level Line. Put the tank
cover back on. Make
sure it fits securely for
smooth misting.
Note:
Do not add essential oils to the water tank.
Do not add water in the fan vent.
Excessive water will flow out from the overflow hole when you overfill the
tank.
When putting back the tank cover, try the other way if it doesn't fit well.
Power On & Off
Connect the power cord
of the humidifier to a
power source. A beep
sound will be heard; the
LED display will light up
and dim after 2s if no
button is touched. The
unit is now in standby
mode.
Note:
If there is not enough water inside the water tank or mist chamber (Low
Water icon will blink 3 times and turn off), the humidifier will not mist.
(Refer to the Troubleshooting section of this Guide.)
Do not lift the tank / mist cover when misting in case of leakage.

Mist Adjustment

When the unit is on, tap the Mist Level button to cycle through Low
-> Medium -> High mist levels. The corresponding LED indicator(s)
will light up solid blue with a beep sound.
Note: When powered on again, the device will memorize the last mist level
setting if not disconnected.
Page.7

Timer Setting

Tap the Timer button to enter the timer
settings. Tap the Timer button again to
choose from 1H – 24H and the LED
display will show the number
accordingly.
To cancel the timer setting, tap the
Timer button repeatedly until "00" is
shown on the LED display after "24H".
Note:
When you're setting the timer, the humidity level number will dim; 2s after
setting is completed, the device will exit the timer setting mode and the
humidity level will show again.
Tap and hold the Timer button for 2s to exit timer setting.
When it's powered on, you need to set the timer again if needed (last setting
not memorized).

Night Light Setting

When the humidifier is in standby mode, tap the Night Light
button to turn on the night light; to turn the light off, tap the
button again.
When the humidifier is powered on (LED display is on), tap the
Night Light button to turn on the night light; tap the button again,
both the night light and LED display will be off. Tap a third time,
LED display will be on but night light stays off; a fourth tap will
turn on the night light.
When the humidifier is in standby mode, tap the Night Light
button to turn on the night light, tap the button again to turn the
light off; the LED display stays off all the time.
Powered ON Turn ON the
1
night light
Note:
When the device is powered off (tap the Power button when it's on), all
settings including mist, timer, night light and LED display will be off.
Turn OFF the night Turn ON the LED
2
3
light & LED display display / Night light
stays OFF
Page.8