Advertisement
Quick Links
STEP 1
Connect power to the camera.
Wait for the camera to load
(approximately 1 minute).
STEP 2
There is a «Reset» button
at the back of the camera.
Hold this button for about
7-8 seconds. You will hear
a characteristic sound.
After a successful reset,
the camera will emit three
short «beep beep beep»
sounds.
STEP 3
For the first connection, place
the camera as close to the
1-6 ft
router as possible (1-6ft).
STEP 4
Connect smartphone to
your Wi-Fi network (with
the Internet).
Note. If the router supports
two frequencies, use a 2.4 GHz
network when connecting.
STEP 5
Download and install
the Smart Life app in
the App Store or the
Play Market.
Go to the Smart Life
app and register a new
account.
STEP 6
STEP 7
First select the «Video
Go to the Smart Life app.
Surveillance» category.
Click «Add Device».
Then select «Smart
Camera» from the list.
Advertisement
Related Manuals for Morvelli FHD-30
Summary of Contents for Morvelli FHD-30
- Page 1 STEP 5 STEP 1 STEP 3 Download and install Connect power to the camera. the Smart Life app in Wait for the camera to load the App Store or the (approximately 1 minute). For the first connection, place Play Market. the camera as close to the 1-6 ft router as possible (1-6ft).
- Page 2 A page with resetting a QR code. You need to scan this QR code with the the camera will open. Morvelli FHD30 camera. We have completed this point in the Place your smartphone previous step. Click opposite the camera «NEXT».
Need help?
Do you have a question about the FHD-30 and is the answer not in the manual?
Questions and answers