Table of Contents
Related Manuals for gagalight RGB4000
Summary of Contents for gagalight RGB4000
- Page 1 User Manual RGB4000 laser light Introduction Thank you for purchasing our product. To ensure proper operation, please read this manual carefully before using the product. After reading it, keep it in a safe place for future reference. 第 1 页...
-
Page 2: General Information
General Information The following chapters explain important information about lasers in general, basic laser safety and some tips about how to use this device correctly. Please spend some time reading these information as some of them are critical for safe and efficient operation of this laser display system. 第... - Page 3 Caution This laser entertainment system is rated as a Class IV laser product and manufactured in accordance to EN 60825-1:2007. Avoid eye or skin exposure to direct or scattered radiation. Wear protective goggles of suitable optical density if necessary. If the laser is operated in a situation where health or property injury may occur the operation must be stopped immediately.
-
Page 4: What Is A Laser And How Does It Work
What is a laser and how does it work? What is a LASER? The laser is a bunch of energy waves (streams of photons called radiation) with the same amplitude and faze that are flowing in the same direction; meaning they are coherent – they stick together and form a laser beam. -
Page 5: Laser Safety First
Laser Safety First! Before proceeding any further, please read the following safety page very carefully. It could help you avoid dangerous and hazardous situations which could lead to serious injury or property damage. Any laser system classified as a Class 4 laser must be used with caution. If you are not an experienced laser operator we would strongly recommend that you attend a laser display safety course as soon as possible, and ideally before this laser system is used in pubic areas. -
Page 6: Installation Of The System
Installation of the System The manufacturer is not liable for damages or a injury caused by improper installation of the system. The installation should be carried by a qualified installer who should follow the Laser Safety Regulations of respective country. Please follow these rules during the installation: 1: Do not connect the device to power supply during the installation. -
Page 7: Scanning System
Scanning System The product warranty does not cover the damages to the scanning system caused by improper use of the scanning system or by incorrect programming. Therefore it is essential to understand how the scanning works and where are the limits of it. In this manual we will explain only the basics of it but it is the responsibility of every user to educate themselves so they can avoid damage being caused to the scanning system and costly repairs. - Page 8 So we need to display 300 points 35 times per second = 10.500 pps. This means that we could display 3of these stars beside each other within one single laser effect and that it would be quite close to the scanner limit (3 × 10.500 = 31.500pps). This however applies than 8 degrees on both axes! If we start to increase the size of the projection (scanning angle) it is necessary to either lower the number of points within the effect or drop down the scan-rate in the control software (FPS) to a safe level –...
- Page 9 Connection Diagram Please check that all the signal and power leads are correctly installed and that the safety keys are inserted in all necessary positions. Basic connection diagram Both E-STOP Remote safety key and laser system safety key must be inserted and switched to ON position in order to disable the interlock.
- Page 10 Power Connections Method Please connect power as following ： L（live wire ）=brown wire E （earth wire） =yellow/green double color wire N （null line ）=blue wire When connecting,ensure that the voltage and frequency of power supply match the power requirement of the product. This product is Class 1 protection equipment.The yellow-green double colors wire must be earthed by qualified personnel.
- Page 11 This product accepts digital control signals in protocol DMX512(1990).The amount of lighting fixtures connected in parallel is no more than 32.Connect the DMX controller's Output to the first lighting fixture's Input cable with a 2 core XLR signal cable(Shown as above ),connect the first lighting fixture's Output cable to the second lighting fixture's Input cable and connect the rest light fixtures in the same way.Eventually,connect the last lighting fixture's Output cable to a DMXterminator Under DMX-512 signal control mode,the last lighting fixture's DMX Output must be...
- Page 12 LCD Menu and function introduction Main panel displays: Version: Software version; DMX Address: DMX address code; Mode: Current working mode; File: The current working file; 1. In the main panel, click the button to enter the menu. 2. In the main panel, ILD and PRG mode, double-click the button to change the folder. 3.
- Page 13 Set playback State without according to Show DMX signal DMX State Show Mode No light Black Master-slave Set to Slave state when Slave Slave status not connected Slave Mode Host Master positive Positive Y direction Valid for signals from Y Phasic this unit and ILDA anti- Reverse...
- Page 14 * DMX-512 Channel function Channel Function Value Description Closed light Mode selection Automatic mode 6-49 Voice control mode 50-99 PRG file sequential playback 100-149 ILD file loop playback 150-199 Manual mode 200-255 Manual mode PRG and ILD modes Graphics / Graphic selection, one folder selection 0-255...
- Page 15 Automatic irregular jumping 226-245 Voice-controlled irregular jump 246-255 Adjust the position manually 0-125 Y move Automatic up and down cycle movement 126-185 Auto jump up and down cyclic movement 186-225 Automatic irregular jumping 226-245 Voice-controlled irregular jump 246-255 No scaling 0-10 Zoom Resize manually...
-
Page 16: Product Technical Parameters
Product technical parameters 1.Voltage:AC90~240V 50~60HZ±10% 2.Power consumption:120W 3.Laser source: diode. 4.Laser power /wavelength: 1x1000mW Red(638nm) 1x1000mW Green (520nm ) 1 x 2000mW Blue (445nm ) 5.Beam size: 4mm at aperture 6.Divergence: <1.0mrad-full angle 7.Colors:RGB full color 8.External Modulation:Analog 9.DMX Channel:17CH 10.Scanner system: 30kpps 11.Control signal:DMX-512 international standard signal 12.Control mode:Music,auto,master-slave and DMX-512,ILDA Control... -
Page 17: Maintenance
Maintenance To prolong the life of the product, it is very important to do maintenance work. The environment is hash outdoors, or if the product is idle for a long time, damp, smoke or particularly dirty surroundings can cause greater accumulation of dirt on its cover and housing.