InFocus IN35 User Manual page 7

If you are using a desktop computer and want to see the image on your
connect monitor cable
computer screen as well as on the projection screen, plug the monitor cable
to the Monitor Out connector on the projector.
connect VESA cable
If you prefer connecting your projector to your computer with an optional
VESA cable, connect one end of the cable to the VESA port on your com-
puter, and connect the other end of the cable to the blue Computer 2 con-
nector on the projector.
You can control the projector from an LCD control panel or computer by
connect RS-232 cable
connecting an RS-232 cable to the projector's Serial Control connector. Spe-
cific RS-232 commands can be found in the Service and Support section of
our website.
6