Page 1
2020 AA1XLPE Devices Quick Install Guide INSTALLER TEST CODE: Recommended Wire Guide 18 gauge stranded - up to 25 ft 16 gauge stranded - up to 50 ft 12 gauge stranded - up to 60 ft CODE WILL STOP WORKING AFTER 10 USES. Technical Support: 972-231-1999 option 2 FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Page 2
WATCHMAN **Recommended wiring: 18/6 shielded for main device, and 18/4 shielded for optional wiegand devices** Items Included in Kit ❶ ❻ WXL Unit Bolts ❷ ❼ 12 Volt DC Power Supply Quick Install Guide ❸ ❽ Magnetic Read Switch Activation & Test Process ❹...
Page 3
WATCHMAN Interface Wiring Diagram (Oriented the same as the Watchman install) ❷ ❸ ❶ ❹ 6-Wire Installation Instructions ❶ Wire main power from the transformer to the power connector on the circuit board. ❷ Connect gate trigger wires from the Normally Open (NO) Common (C) to the free-exit or exit terminals on the gate operator.
Page 4
WATCHMAN Installation Testing Enter the Testing Code, then tap the Enter Button. Home Call List Enter a Code Enter Button Code will activate Relay 1 (the gate should open). Locate a Callgroup and tap on it to call it. An automated message will play confirming the call was successful.
Page 5
WATCHMAN External Camera Installation • If you’re installing an External Camera, call CellGate Technical Support for testing. • Technical Support: (972) 231-1999 option Customer Information Leave the following items with the Customer: • Customer Information Packet • WXL - Key...