Recording Video; Photographing & Menu Settings; Playback - FalconEye Electronics 1440P 2nd Gen User Manual

8. Menu: In standby mode, short press menu button, enter into main menu settings. short
press UP/DOWN button, to select menu option options. short press OK button to confirm
saved settings. Short press menu button to exit menu settings and return to camera view.
9. Mode button: In standby mode, short press mode button can switch between different
mode (Video/Photo/Playback)

Recording Video

While in video recording mode, upper left of the screen will show icon
key to start recording, icon
again to stop recording and the icon
Photographing and Menu Settings
1. Press Menu button while in standby mode to enter camera mode. Once in camera
mode, press OK to take picture. To confirm you are in camera mode, you will see
an icon on upper left.
2. Press OK key to take photo. During this process, have the camera as stable as
possible to avoid shake affect image quality.
Tips: In any mode of photographing, you can press the mode button to cycle
through video shooting mode, photo taking mode and playback mode.

Playback

1. Browse file: When device start up completely and enter the recording mode, press
the mode button to switch to playback mode, press the up or down key you can
browse pictures and video data. Playback by file type, you can only browse the video
file when the file type is video, and can only view the pictures when the file type is
picture.
2. Delete and Protection: In the playback mode, press the Menu key, you will see
"Delete" & "Protection lock" option, press the OK button to "delete single video" or
"delete all" option to delete all videos. You can also select the "Lock" option to save
videos and prevent videos from being erased during the loop record settings.
will flash on the upper left screen. Press the ok key
will disappear.
5
,press ok
.