IMPORTANT SAFETY INSTRUCTION When using electrical appliances, basic safety precaution must always be followed: 1. Carefully read all instructions before operating and save for future reference. 2. This appliance is for normal household use only. 3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
BEFORE FIRST USE After unpacking, disassemble unit before using first time. Refer to “HOW TO DISASSEMBLE” for directions. Wash all parts except motor base in warm, soapy water. Rinse and dry immediately. DO NOT IMMERSE MOTOR BASE IN WATER. ASSEMBLY Fig1 for chopper blade / kneading blade / emulsifying disc...
Page 5
Chopper Blade Assembly(Refer to Fig1) 1. Position Driver on motor base. 2. Position processing bowl into the Driver and turn clockwise to seat firmly on motor base. 3. Place blade adaptor onto the Driver. 4. Place chopper blade onto the blade adaptor. 5.
Page 6
Kneading Blade Assembly (Refer to Fig1) Position Driver on motor base. Position processing bowl into the Driver and turn clockwise to seat firmly on motor base. Place blade adaptor onto the Driver. Place kneading blade onto the blade adaptor. Turn the kneading blade to the right position and then put the flour into the bowl Place cover on bowl, turn clockwise until cover interlocks on bowl.
Page 7
Fig2. For Slicing blade, coarse graing blade and fine grating blade Slicing blade, coarse grating blade, fine grating blade Assembly (Refer to Fig2) Position Driver on motor base. Position processing bowl into the Driver and turn clockwise to seat firmly on motor base. Install desired blade onto the blade holder.
Page 8
Notes: Choose desired disc according to the processed food and desired shape of food. Push softly when feeding food. Pre-cutting food into smaller pieces according to the diameter of feeding tube. Feed gradually for better effect. When cutting soft food, choose lower speed to avoid the ...
HOW TO DISASSEMBLE Remove pusher. Turn cover counterclockwise, lift and remove. Lift blade holder from driver. Lift blade and remove from blade holder. Turn bowl counterclockwise to unlock from motor base. Lift and remove. CLEANING Wash all parts except motor base in warm, soapy water. The discs can be disassembled to ...