Related Manuals for Magiccos FP416A
Summary of Contents for Magiccos FP416A
- Page 1 Instruction manual FP416A DIGITAL FOOD PROCESSOR TECHNICAL SPECIFICATION Model: FP416A Voltage: 120V~60HZ Rated power: 1000W Processing bowl capacity: 3.5L (2.0 L rated )
-
Page 2: Safety Precaution
SAFETY PRECAUTION When using electrical appliances, basic safety precaution must always be followed: 1. Carefully read all instructions before operating and save for future reference. 2. This appliance is for normal household use only. 3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. -
Page 3: Package Contents
PACKAGE CONTENTS 1. Rotary switch 2. Motor base 3. Processing bowl 4. Driving shaft 5. Bowl cover 6. Pusher 7. Doughing blade 8. Chopping blade 9. Blade cover 10. Spatula 11. Disc holder 12. Slicing blade disc 13. Shredding blade disc 14. -
Page 4: Installation
INSTALLATION 1. Position the motor base(2) on the flat and dry board. 2. Position the processing bowl(3) onto motor base, turn clockwise to make it fixed firmly. 3. Place the driving shaft(4) onto the rotor inside the bowl, seat it vertically. 4. -
Page 5: Switch Panel
SWITCH PANEL Manually speed selection (min to max) Start / Pause LCD screen On / off button (show the working time ) Smoothie function Pulse function Meat chopping function Ice crush function The touch buttons are on /off, pulse, Ice crushing, meat chopping, Smoothie, start and pause You can also select speed manually by turning the knob button switch if you do not choose the auto mode functions. - Page 6 the program is confirmed please press start button to start the program. Once the working is started the LCD screen will show countdown working time until the program is finished. During the working process for auto mode, you can pause the program by pressing start and pause button, the machine can resume to work once pause button be touched again, the machine will continue to work till program is finished.
- Page 7 Fig1 for chopping blade and doughing blade Chopping blade (installation refer to Fig1) Standard processing time is 30sec to 1 minute, the volume per batch refer to the following table :...
- Page 8 I ngred ient Vol um e Choc ol ate ≤ 200g Chees e ≤ 350g M eat ≤ 800g Ve ge tabl e & S pice 100~ 1 50g Fru i t 300~ 5 00g O nion ≤ 800g Doughing blade (installation refer to Fig1) Standard processing time is 20secs to 30secs, the volume per batch refer to the following table : I ngred ient...
- Page 9 Fig2. For shredding, slicing and mashing blade Disc for shredding , slicing and mashing (12-14) (installation refer to Fig2)
-
Page 10: Maintenance
Standard processing time is 1 minute. Start the machine to see if the machine is working properly. Then stop the machine and prepare food. Choose the blade disc according to ingredients and the cutting shape required. Put the blade disc into the plastic disc holder (11), then seat it in the driving shaft (4), close the processing bowl cover (5), and lock it well. -
Page 11: Troubleshooting
TROUBLE SHOOTING Problem Solution Ensure correct assembly. Make sure power plug is plugged in Machine doesn’t work. properly. Check if the mains have tripped, or if there is a power outage. Processing bowl may loosen during Machine stops running suddenly. vigorous processing.