HOLTKÖTTER 6415 P1 Series Assembly Instructions

Touch table lamp

Advertisement

205 Hardman Avenue South, South Saint Paul, MN 55075
Voice: (800) 899-5444 • Fax: (888) 552-8661
e-mail: customerservice@holtkoetter.com
www.holtkoetter.com
CAUTION, IMPORTANT SAFETY INSTRUCTIONS
This portable luminaire has a polarized plug (one blade is wider than the other) as a feature to
reduce the risk of electrical shock. This plug will fit a polarized outlet only one way. If the plug does
not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Never use with an extension cord unless plug can be fully inserted. Do not alter the plug.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC
SHOCK, EXPOSURE TO EXCESSIVE UV RADIATION OR
INJURY TO PERSONS
WARNING - To reduce the risk of FIRE, ELECTRIC SHOCK,
EXPOSURE TO EXCESSIVE UV RADIATION OR INJURY TO
PERSONS:
1.
Turn off power/unplug and allow to cool before replacing bulb.
2.
Bulb gets HOT quickly. Contact only switch/plug when turning on.
3.
Do not remain in light if skin feels warm.
4.
Do not look directly at lighted lamp.
5.
Keep lamp away from materials that burn.
6.
Use only with a 75 Watt or smaller bulb.
7.
Do not touch the bulb at any time. Use a soft cloth. Oil from skin may damage bulb.
8.
Do not operate the portable luminaire with a missing or damaged guard, lamp containment
barrier or UV filter.
SAVE THESE INSTRUCTIONS
Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN.
ASSEMBLY INSTRUCTIONS FOR
Touch Table Lamp
No. 6415*P1 & No. 6416*P1
Congratulations, you have just purchased
the leading-edge dimming technology
from Holtkötter International, Inc. Our
"Dimm-System Punkt 1" (Dimming System
Point 1 (*P1)) is specifically designed to
provide specialized features for ease and
convenience of use.
Features of "Dimm System Punkt 1"
include:
Point Dimming - the lamp may be turned
on with a single click of the P1 dimmer.
Located on the base.
Soft On - the lamp will come on low and
continue to brighten to full brightness.
This allows the eye to adjust to a gradual
increase in light.
Soft / Delayed Off - turn the lamp off with
a single click of the P1 dimmer. The lamp
will dim to 60% brightness of the original
setting, remaining briefly at that level to allow you to exit the room; then the lamp gradually turns
itself off. This "soft" off provides a few moments of light after turning the lamp off, rather than
immediate darkness as is the case with other switches.
Dimming Cycle - to adjust the lamp to the perfect light level for any situation, press and hold
the P1 dimmer. The dimmer will cycle through all dimming levels. When the lamp achieves the
light level of your choice, release the P1 dimmer.

Care Instructions

Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be used to spot
clean. Do not use common household cleaners on lamps or fixtures, as the lacquer on the
outside of the brass may be damaged as a result.
®
Holtkötter
and Holtkötter Leuchten
6415/1*P1 (l)
6416/1*P1 (r)
®
are registered trademarks of Holtkötter. All Rights Reserved.
© Holtkötter

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6415 P1 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for HOLTKÖTTER 6415 P1 Series

  • Page 1 ASSEMBLY INSTRUCTIONS FOR Touch Table Lamp 205 Hardman Avenue South, South Saint Paul, MN 55075 Voice: (800) 899-5444 • Fax: (888) 552-8661 No. 6415*P1 & No. 6416*P1 e-mail: customerservice@holtkoetter.com www.holtkoetter.com CAUTION, IMPORTANT SAFETY INSTRUCTIONS Congratulations, you have just purchased the leading-edge dimming technology This portable luminaire has a polarized plug (one blade is wider than the other) as a feature to from Holtkötter International, Inc.
  • Page 2 ASSEMBLY INSTRUCTIONS FOR e-mail: customerservice@holtkoetter.com www.holtkoetter.com Please make sure the following parts are included: Lamp Base (A) with Punkt1 (*P1) dimmer (D) Bulb (B) For 6415/1*P1, a 60-Watt clear Halopin bulb is provided. (Order Code: 9250*060-HPNCL) For 6416/1*P1, a 75-Watt frosted Halopin bulb is provided. (Order Code: 9250*075-HPNFR) Glass Shade (C) Install the Bulb and Glass Shade Install the new bulb (B), being careful not to touch the bulb envelope with your bare...

This manual is also suitable for:

6416 p1 series

Table of Contents