Turing Vision Smart Series Quick Start Manual page 2

TURING Vision Quick Start Guide – Smart Series Hardware Setup
Components
Congratulation on your purchase of the TURING Smart Series IP Cameras and NVR system.
This guide will help you setup the Turing Smart Series IP Cameras and NVR systems and get things running.
Be sure to check to see that all parts are present. Note, some third-party components such as monitors,
mice and keyboards can also be used with this system. If you encounter any problems, please visit
www.turingvideo.com for additional support.
TURING VISION PRODUCTS
Turing Vision Bridge
SMART Series NVR with Mouse SMART Series: IP Camera(s)
PERIPHERALS NEEDED (Not Included)
Monitor Router - Optional Network Cable (3) HDMI Cable
CAT5/CAT6 (or VGA Cable)
(Or Network with internet access)
2