ULSee HC 200 Quick Installation Manual

ULSee Health Watch Elite
Quick Installation Guide For HC 200

1. Health Watch Basics Features

button
Wrist Strap
Display Screen
| Charging Method
Please take the band out in first charge, and charge by the corresponding charger.
(Charge mode: as shown in below diagram, please place the band in charge, align two
touch points of charger)
| Wearing Method
1. Best wear the Heath Watch behind ulna styloid process;
2. Adjust its size according to adjustment holes, and fasten in Health Watch buckle.
3. Sensor shall be close to skin avoiding moving.
Ulnar styoid process
Left Hand
Sensor
| Power On/ Off
1. Have a long press on band for 3 seconds in shutdown and
charging state to power on.
2. Switch to shutdown interface in start-up state and have a long
press on shutdown interface for 3 seconds to power off.

2. Install Three Apps

Scan the following QR code to download the apps:
Join Health app, Google fit app, Alexa app.
JOIN HEALTH android app
JOIN HEALTH ios app
Regulation Hole

3. Device Connection

It is required to correct by connecting with JOIN HEALTH App in first use. The band
automatically synchronizes time after connecting successfully. Otherwise, step calcula-
tion, heart rate data, temperature data won't be updated.
Open the APP click to set icon
My device (IOS) Search
Click the upper right to serach icon
Click the device to connect
Bluetooth connection: After successful paring, JOIN HEALTH App will automatically
save band Bluetooth address.
Data synchronization: Manually drop HEALTH App main page down to synchronize
data; the band can save offline date of 7 days. After synchronize, "synchronization
finish" will popped up.

4. JOIN HEALTH App Set up

4.1 Welcome page
shutdown interface
Google fit android app Alexa android app
Google fit ios app Alexa ios app
device (Android)
4.2 Create an Account: 4.3 Main Page:
My Devices
- Look for Verification Email in
Your Inbox
- Verify Your Account to Sign
In for the First Time

5. Google Fit Binding

5.2. Home Page
5.4. Sign In with Google account
5.4.2 Then Click "Go to ulsee.club"
5.6. Add & See Your Physical Info
to Your Data
5.8. Allow Permissions
4.4 Scanned
Devices
5.1. https://iot.ulsee.club/homebutler/sign-in
Sign In with JOIN HEALTH App Account
5.3. Click on Google Fit Button
in Account Binding Section
5.4.1 If there shows a warning window,
please click "Advanced" below
5.5. Add & See Your Heart Rate Info
to Your Data
5.7. Confirm Your Choices
5.9. Account Is Connected