Table of Contents
Advertisement
VP-1405A Advanced Power
V-PM1000 Series, Veesta Power Module Product Series
48V Power Supply & Charger Instructions & User's Manual
Chapter 4 -
4.1
Unit Observation
4.2
Terminal Definitions
FG
Terminal
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization.
Unit Installation
The VP-1405A is a wall mount device that install on the any place in
cubicles, control cubicles and normally in the place that have good
air-cooled conditions. It is recommended that assure the good air-
cooled position for the VP-1405A module.
The VP-1405A consists of attachable terminal block. It is
recommended detach terminal block and do wiring based on the
instructions on this manual. Afterwards attach terminal wires to the
base unit.
The warranty of system is based on correct wiring of device, if any
wrong wiring it may damage the device and it is out of scope of
warranty.
Terminal
1
Figure 4-1: VP-1405A Terminal Definitions
Chapter 4 - Unit Installation
Terminal
22
Page 18 of 46
Advertisement
Table of Contents
