Advertisement
Table of Contents
The padlock is preset to open at 0-0-0. First, make sure you can lock and unlock the
padlock with 0-0-0. After, you can set your combination code.
Set the combination code:
Step 1
Turn the dials and align 0-0-0 with the guide line (C).
Step 2
Press the cable head(A) down completely until the next step is done.(Picture 1)
Step 3
Turn the dials to set your new 3-digit combination code to align with the guide line (C).
Step 4
Pull the cable head out and the padlock is now set with your new combination code.
Your padlock is set with this new combination code. Please make sure you can
lock/unlock with the new combination code before you lock to an object.
(You can reset to another combination code with the same steps. But in Step 1, unlock
the padlock with your current combination code.)
Keep the combination code in a safe and accessible place for future reference.
To Lock
1. Press the cable release trigger (B) and pull the cable head (A) out.
2. Insert the cable head (A) into the locking port (D) until it clicks into place.
Scramble the dials (C) to lock.
To Open
1. Align your combination code with the guide line (C).
2. Push the release button (E) and pull the cable head (A) out.
3. Push the cable release trigger (B) to retract the cable.
!
The cable cannot be retracted when the padlock is locked.
BV-8981S User Guide
Press Down
A
C
D
B
E
Advertisement
Table of Contents
Related Manuals for bosvision BV-8981S
Summary of Contents for bosvision BV-8981S
- Page 1 BV-8981S User Guide The padlock is preset to open at 0-0-0. First, make sure you can lock and unlock the padlock with 0-0-0. After, you can set your combination code. Set the combination code: Step 1 Turn the dials and align 0-0-0 with the guide line (C).
- Page 2 BV-8981S User Guide 鎖的出廠預設密碼是0-0-0。請先確定可以用0-0-0開鎖及上鎖，再進行變更新密 碼的步驟。 如何設定密碼： 旋轉數字輪，讓0-0-0對齊開鎖導引線(C)。 下壓鋼纜線頭(A)到底。(參考圖一) 在鋼纜線頭(A)內縮時，旋轉數字輪，讓你要設的密碼對齊導引線(C)。 設定好密碼請牢記，然後拉起鋼纜線頭(A)，此時新密碼已經設定完成。 新的密碼已經設置完成。請先確定可以用這組新的密碼開鎖及上鎖，之後再將鎖 用在你的物品上。(你也可以依同樣的步驟，再次變更成其他的密碼。只要在步驟 一用你現在的密碼開啟後，再進行變號的步驟。) 請將你的密碼記下來並保管好。以便將來忘記密碼的時候，可以找回密碼開鎖。 如何上鎖 1.『按住』鋼線收放鈕(B)以便將鋼線(A)拉出到適當長度。 2. 把鋼線頭(A)插入鎖孔(D)直到聽到喀聲。把數字號碼鍵撥亂完成上鎖。 如何開鎖 1. 將你的密碼對其開鎖導引線(C)。 2. 按下開鎖鍵(E)並且抽出鋼線頭(A)。 3. 按下鋼線收放鈕(B)把鋼線收回。 下壓 注意一：在上鎖的狀態，鋼線無法伸縮。 注意二：密碼不對時無法下壓鋼線頭(A)， 也就是無法重新設定新密碼， 也無法下壓開鎖鍵(E)。 注意三：任何密碼都可以在特定時間內被破解。...
Need help?
Do you have a question about the BV-8981S and is the answer not in the manual?
Questions and answers