Page 1
2-Sided Black Floor Poster Stand with 5-Pocket ASSEMBLY INSTRUCTIONS Product No. FP01568P5 Parts & Hardware Prior to assembly, please be sure all of the parts and hardware are present. If you are missing any hardware, please call immediately. Acrylic 5-Pocket...
Page 2
2-Sided Black Floor Poster Stand with 5-Pocket ASSEMBLY INSTRUCTIONS Product No. FP01568P5 Tighten legs keeping slots aligned Step 1: Attach the black legs to base unit using the supplied hex bolts & hex wrench - Position each leg keeping keeping the top slots aligned. Hold each leg in place while tightening the bolt(s) with the hex wrench.
Page 3
2-Sided Black Floor Poster Stand with 5-Pocket ASSEMBLY INSTRUCTIONS Product No. FP01568P5 Step 2: After removing the poster holder & spacer panel from its packaging, peel off the protective film and insert the spacer panel between the two sides Step 3: of the sign holder keeping the curved corners to the bottom and roughly aligning the holes.
Page 4
2-Sided Black Floor Poster Stand with 5-Pocket ASSEMBLY INSTRUCTIONS Product No. FP01568P5 Step 4: Align the two holes in the back of the 5-pocket literature holder with the holes in the legs/sign holder. Insert the threaded rods through the holes and tighten the lock knobs over each end.
Need help?
Do you have a question about the FP01568P5 and is the answer not in the manual?
Questions and answers