Technical Data - ALDI Ferrex FPLT-254 E1 User Manual

AUS
General Safety Warnings/ Technical data
• Keep the engine speed at the level required for cutting; never increase
the engine speed above the required level.
• If grass gets caught in the cutting edge during operation or you need
to check or refuel the product, always switch off the engine.
• If someone calls for you while you are working, you must always switch
off the engine before turning towards them.
• Never touch the spark plug or cable while the engine is running. There
is a risk of electric shock if disregarded.
• Never touch the silencer, spark plug or other metal parts of the engine
while the engine is running or immediately after the engine has been
switched off. Failure to do so may result in severe burns.
• Check that the cutter has stopped rotating when the engine is idle be-
fore working with the product again.
VI. Technical data
Grass trimmer cutting data
Cutting diameter
Thread count
Max. speed
Drive
Displacement
Engine idling speed range
Rated engine power
Fuel tank volume
Type of motor
Weight
Technical changes reserved!
Information about noise level measured in accordance with applicable standards:
Sound pressure L
pA
Sound pressure L
WA
Measurement uncertainty K
16
= 94.5 dB(A)
= 108 dB(A)
= 3 dB(A)
PA
380 mm
2 x 2.0 mm
9000 min
-1
25.4 cc
3000 +/- 300 min
-1
900 W
0.5 L
2-stroke engine,
air-cooled
4.9 kg