Advertisement
Quick Links
Stripe Reader M2
Mobile reader for chip, contactless and swipe
Supported SDKs: iOS and android
Reader Overview
NFC
contactless
tap location
LED status indicators
USB-C
charging port
Magstripe slot
Reset button
For EMV card insert slot
Package Contents
Device
USB-A to USB-C cable
www.stripe.com/terminal
Set Up Instructions
STEP 1
Connect the charging cable to the reader and charge it for two hours before
initial use. Please use the charging cable provided in the reader box.
STEP 2
Step 2: Power on the reader and enable Bluetooth on your phone or tablet.
Connect the reader to your phone or tablet using your point of sale app, not
device settings.
** For contactless tap, please ensure the card or mobile device is placed within 4cm of the contactless tap logo.
For magswipe and card insert payments, please ensure the card is orientated correctly as shown.
Power button
X1
X1
LED Status Indicators
First LED ON
LEDs ON in consecutive order
Ready for tapping card
Reading card information
"BEEP"
First LED ashing
Transaction completed
Standby mode
Charging Status
Full charge
75% charge
50% charge
25% charge
Charging
4 LEDs ON + "BEEP"
Card read successful
2 "BEEP"s
Error, please retry
Advertisement
Related Manuals for Stripe M2
Summary of Contents for Stripe M2
- Page 1 LED Status Indicators Device First LED ON LEDs ON in consecutive order 4 LEDs ON + “BEEP” USB-A to USB-C cable Stripe Reader M2 Mobile reader for chip, contactless and swipe Ready for tapping card Reading card information Card read successful “BEEP”...
- Page 2 ©2021 Stripe, Inc., All rights reserved. iOS is the trademark of Apple Inc. Android™ is a trademark of Google Inc. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Stripe, Inc., is under license.
Need help?
Do you have a question about the M2 and is the answer not in the manual?
Questions and answers