Spa Sciences ECHO Quick Start Manual

A Closer Look
ECHO
Foundation Brush Head
Power Indicator Light
Power/Speed Control
Button
Brush Handle
USB Cord
Usage Guide
ECHO
1. Secure your hair away from
your face before you begin your
makeup application.
2. With the Brush Head attached,
Press the Power/Speed Control
Button to activate your ECHO
and select the speed setting
you would like to use. Low,
Medium, High. To deactivate
ECHO, press and hold the
button for 2 seconds.
3. You can use ECHO for every
step of your makeup routine.
ECHO expertly applies,
foundation, powder, blush,
contour and highlight. ECHO is
compatible with liquid, powder,
MEDIUM
gel, cream and mineral makeup.
4. For liquid application: you may
choose to apply a couple of
dots onto the skin and then use
ECHO to flawlessly blend out
over the entire face and neck.
Or, you may choose to apply
liquid makeup directly onto the
Brush Head. TIP: ECHO should
be powered OFF if applying
makeup to Brush Head and not
activated until ready for use.
Expert Advice
ECHO
1. For powder makeup
application, make sure
ECHO is powered OFF and
gently swirl the Brush Head
into a compact or into a lid
of loose makeup. Tap off
excess product and power on
your ECHO. Glide ECHO all
over the face and neck for a
perfectly seamless finish.
2. Which speed should I
LOW
select? ECHO comes with 3
speed settings so that you
can personalize your makeup
application. You may use any
speed for any step of your
makeup routine. We have
provided a general guide
below.
• Liquid Foundation =
Medium or High Speed
• Setting Powder = High
Speed
• Blush = Low or Medium
HIGH
Speed
• Contour = Low or Medium
Speed
• Highlight = Medium or
High Speed.