Advertisement
V
Smart Lock Setup Guide
Modify admin
Add
fingerprint
password
Add user fingerprint
Add temporary
Add
fingerprint
fingerprint
Add coercive
Add card
fingerprint
3.3 Add card
3.3.1 Add management card
Similar to adding passwords, the specific add process for card is as follows:
Modify admin fingerprint
Add
Add user fingerprint
password
Add temporary
fingerprint
Add
Add coercive fingerprint
fingerprint
Add card
3.3.2 Add user card
The user card can be used for unlocking in the normal mode, with the following details added:
Modify admin fingerprint
Add
Add user fingerprint
password
Add temporary
fingerprint
Add
Add coercive fingerprint
fingerprint
Add card
3.3.3 Add temporary card
Temporary cards can only be used for unlocking in normal mode. The temporary card number will be
automatically deleted after the temporary card is used once. The specific add process is as follows:
Modify admin fingerprint
Add
Add user fingerprint
Add temporary
password
fingerprint
Add
Add coercive fingerprint
fingerprint
Add card
3.3.4 Add coercive card
The coercive card can be used for unlocking in the normal mode, with the following details added:
Modify admin fingerprint
Add
Add user fingerprint
password
Add temporary
Add
fingerprint
Add coercive fingerprint
fingerprint
Add card
4. Delete users
4.1 Delete password
The admin password cannot be deleted, and the temporary/user/coercion password can be deleted.
The specific operating process is as follows
002 User password
Delete
081 Temporary
password
password
Delete
091 Coercive password
fingerprint
Delete card
4.2 Delete fingerprint
At least one admin fingerprint is reserved when deleting the fingerprints. Temporary/user/coercive
fingerprints can be deleted. For specific operating steps, please refer to password deletion. The deletion
process is as follows:
Delete
111 User fingerprint
241 Temporary
password
fingerprint
Delete
fingerprint
271 Coercive
Delete card
fingerprint
4.3 Delete card
The management card can also be deleted when deleting the card. For specific operating steps, please
refer to the deletion password. The operating process is as follows:
301 Management
Delete
card
password
311 User card
Delete
381 Temporary card
fingerprint
391 Coercive card
Delete card
Add coercive
Coercive fingerprint
fingerprint 271 Please
271 Add completed
press your finger
Please enter again
Management card
Add management
card301 Please swipe
301 Add completed
the card
Add user card 311
User card 311 Add
Please swipe the card
completed
Add temporary card
Temporary card 381
381 Please swipe the
Add completed
card
Add coercive card 391
Coercive card 391
Please swipe the card
Add completed
Enter the password or
User password 002
password number to
Delete completed
be deleted
Enter the fingerprint or
User fingerprint 111
Add completed
fingerprint number to
be deleted
Enter the card or card
Management card
number to be deleted
301 Delete completed
V
Smart Lock Setup Guide
5.System setup
5.1[Time setting]
After entering the management mode, select [System Settings], [Time Settings], press the number
buttons to type the time to save, press the [*] button to cancel the last input, and press the [#] key to
confirm after the setting is completed. The specific operating process is as follows:
Add a user
Time setting
Remove a user
Local unlock
System setup
mode
Record query
Remote unlock
mode
5.2 [Local unlock mode]
There are three unlock modes. Normal mode, fingerprint+fingerprint, fingerprint + password. The
unlock mode is fingerprint + fingerprint. Fingerprint + password requires that both fingerprint and
password are not for temporary users. You can adjust the cursor to the corresponding mode
according to requirements, and press the [#] button to confirm the selection. The specific operating
flow is as follows:
Add a user
Time setting
Remove a user
Local unlock
System setup
mode
Record query
Remote unlock
mode
5.2[Remote unlock mode]
There are three unlock modes. Convenient mode, energy-saving mode, close remote. When the
door lock remote unlock mode works in the convenient mode, it can directly communicate with the
host; when the door lock remote unlock mode works in the energy-saving mode, after waking up the
door lock numeric keypad, press "8+#" to wake up the zigbee module and communicate with the
host; When the door lock remote unlock mode works in the close remote mode, remote unlocking,
remote addition of users, remote deletion of users and other functions cannot be performed. When
the door lock is initialized, it is in the convenient mode.
Add a user
Local unlock
mode
Remove a user
Remote unlock
System setup
Record query
mode
Normally open
mode
5.4 [Normally open setting]
When the touch screen is woken up after being normally opened, the LED display screen will prompt
"Normally open is on" and the LED indicator light will be normally green, during which, the door is in
the access state and the external handle can be directly pressed down to open the door without a
password. The normally open mode can be released after an effective unlocking action. Or turn off
normally open by [normally open setting]. The specific operating flow is as follows
Local unlock
Add a user
mode
Remove a user
Remote unlock
System setup
mode
Record query
Normally open
mode
5.4 [Storage status]
The storage status shows the number of registered users of various types and the total capacity of
users of each type. The specific viewing process is as follows:
Add a user
Store status
Remove a user
Voice settings
System setup
Factory settings
Record query
5.6 [Voice settings]
Voice settings are divided into [Turn on Voice] and [Turn Off Voice]. You can set them as required, or
turn voice on and off through the voice key on the back cover plate. The specific operating flow is as
follows
Add a user
Store status
Remove a user
Voice settings
System setup
Factory settings
Record query
5.7 [Factory settings]
The factory setting function initializes the smart operating system, adjusts the cursor to [Factory
Settings], and presses the [#] button to confirm, and presses the [*] key to cancel. The factory
settings can also be restored by pressing on the back cover plate setting button for 5 seconds.
Add a user
Voice settings
Factory settings
Remove a user
System setup
Version
Record query
Information
Set time
Date 16-01-01
Operations
Time 00-00-00
completed
Return
(*)confirm(#)
Normal Mode
Fingerprint+Fin
Normal mode
gerprint
operations
Fingerprint+Pa
completed
ssword
Convenient
Convenient mode
mode
is on
Energy-saving
mode
Close remote
Turn on
Normally open
normally open
is on
Turn off
normally open
Admin password01
To query more
User password00/79
storage, press
Temporary
8 next page
password00/10
Coercive code00/09
Turn on voice
Turn off voice
Voice is on
Recover to factory
Restoring Factory
settings
Settings 》》》
No(*)yes(#)
Initialization
completed
Advertisement
