Subscribe to Our Youtube Channel
Related Manuals for Faithtech FTP3000 Series
Summary of Contents for Faithtech FTP3000 Series
- Page 1 Programmable DC Power Supply User’s Manual (FTP3000 Series) ©Copyright Faithtech Version V1.01 2021-07...
- Page 3 Warranty Limitation The warranty is only limited to the power supply host. Faithtech will not provide free repair if the product is damaged by misuse, negligence, unauthorized modifications, abnormal application environment or force majeure, instead Faithtech shall provide estimated maintenance cost before the repair.
- Page 4 Please observe important safety instructions strictly in the process of operating and using the power supply. Not observing safety precautions or warnings in this manual will probably weaken protective functions provided by the power supply. Faithtech will not assume any liability for damages if the user does not observe those safety precautions.
- Page 5 ____________________________________________________________________________ ---------------------------------------------------------------------------------------------------------------------- The WARNING sign highlights an essential operating or maintenance procedure, practice, condition, statement, etc., which if not strictly observed, could result in injury to, or death of personnel or long term heath hazards. ---------------------------------------------------------------------------------------------------------------------- The CAUTION sign highlights an essential operating or maintenance procedure, practice, condition, statement, etc., which if not strictly observed, could result in damage to, or destruction of equipment.
-
Page 6: Table Of Contents
FTP3000 Series Programmable DC Power Supply Operation Manual ____________________________________________________________________________ Table Of Contents 1. GENERAL DESCRIPTION............................- 6 - 1.1 Overview..............................- 6 - 1.2 Main features............................- 6 - 1.3 Dimension diagram..........................- 7 - 1.4 Model Naming............................- 7 - 1.5 Specification sheet..........................- 7 - 2. - Page 7 ____________________________________________________________________________ 3.15 SEQ (Sequence) Test Setting....................- 30 - 3.16 Constant Power Output (CP) Setting..................- 32 - 3.17 Internal Resistance Simulation (RESI)................. - 33 - 3.18 RAMP Output............................- 34 - 3.19 Sound..............................- 36 - 3.20 Language...............................- 36 - 4. COMMUNICATION INTRODUCTION......................- 37 - 4.1 Communication Interface.......................- 37 - 4.1.1 RS232..............................
-
Page 8: General Description
Faith after years of experience in the design and development of DC switching power supplies. FTP3000 series power output range 900W/1500W, output voltage up to 600V, current up to 80A. It can be widely used in various test environment such as laboratory test, vehicle equipment test, solar inverter test, DC/DC converter and inverter test, engine start test, automatic battery charging, and electronic product life cycle test. -
Page 9: Dimension Diagram
____________________________________________________________________________ 1.3 Dimension diagram 1.4 Model Naming 1.5 Specification sheet Specification table-1 Model FTP3009-40-80 FTP3009-80-40 FTP3009-150-20 FTP3009-300-10 FTP3009-600-5 Voltage 0～40V 0～80V 0～150V 0～300V 0～600V Current 0～80A 0～40A 0～20A 0～10A 0～5A Power 900W Model FTP3015-40-80 FTP3015-80-40 FTP3015-150-20 FTP3015-300-10 FTP3015-600-5 Voltage 0～40V 0～80V 0～150V 0～300V... - Page 10 FTP3000 Series Programmable DC Power Supply Operation Manual ____________________________________________________________________________ Analog output 0～100%F.S. corresponds to 0～5V. Output voltage Voltage accuracy 0.5%F.S. Current accuracy 0.5%F.S. Line regulation Voltage 0.01%+0.01%F.S. Current 0.02%+0.01%F.S. Load regulation Voltage 0.01%+0.05%F.S. Current 0.02%+0.1%F.S. Voltage measurement Resolution 16Bits Accuracy 0.1%+0.1%F.S.
-
Page 11: Quick Guide
Contact authorized dealer or Faithtech after-sale service immediately if there is damage or miss. (3) Check for the power supply unit. Contact authorized dealer or Faithtech after-sale service immediately if the power supply case is damaged or working abnormally. (4) Cleaning. -
Page 12: Front Panel
FTP3000 Series Programmable DC Power Supply Operation Manual ____________________________________________________________________________ 2.2 Front Panel Figure 2-1 FTP3000 Front Panel ① Power switch ② Multi-function key ③ TFT color screen ④ Numeric number key and decimal point key (input data or work with “shift” key for compound operation. - Page 13 ____________________________________________________________________________ Table 2-2 Key Function Descriptions Button Description Multi-function key, the corresponding key function is displayed in screen above the key Input numeric numbers, or work with “Shift” key to perform the functions underneath Decimal point key Exit edit state or current menu. Cursor move up Cursor move down Cursor move left...
-
Page 14: Screen Display
FTP3000 Series Programmable DC Power Supply Operation Manual ____________________________________________________________________________ 2.4 Screen Display Figure 2-3 MAIN PAGE Display ① Status prompt area; ② Readback voltage, current, etc. parameters display area; ③ Parameter setting area; ④ Multi-function key indication; About Status prompt area: ... -
Page 15: Rear Panel
____________________________________________________________________________ 2.5 Rear Panel Figure 2-4 FTP3000 Rear Panel Item Name Description The remote controller uses the CAN connector to connect to a CAN (optional) PC for remote operation. The remote controller uses the RS232 connector to connect to RS232 a PC for remote operation. -
Page 16: Installing
③ There is 1PCS AC input power cable included with the accessories, which should be compatible with your local electric voltage. Contact Faithtech agent or after-sale service immediately if you find the input cable is not matching with the power supply AC input terminal. -
Page 17: Connection
There are two kinds of V-sensing: local V-sensing and remote V-sensing. FTP3000 series power supplies are able to compensate for the voltage drop caused by output connecting cables. For remote sensing, be sure to connect the power supply’s remote sense connector “+S” to the load’s positive input terminal and the “–S”... -
Page 18: Analog Interface
____________________________________________________________________________ 2.7.3 Analog Interface FTP3000 series power supply provides optional analog Interface at its rear panel. This interface has the functions of analog programming input, voltage/current monitoring output, external digital signal input, power supply status and work mode digital signal output. -
Page 19: Function Introduction
3. Function Introduction This chapter describes the main functions and characteristics of the power supply. Reading this chapter, you will have a deeper understanding of FTP3000 series power supplies. 3.1 Local & remote operation mode The power supply provides two operation modes: local operation and remote operation. In the local operation mode, the user mainly operates through the keyboard and knob on the front panel, and checks the power status through the LCD display;... - Page 20 FTP3000 Series Programmable DC Power Supply Operation Manual ____________________________________________________________________________ Table 3-1 Set Menu Layout Default 192.168.1.123 S-Mask Default 255.255.255.0 Baud Serial port baud rate, 4800/9600/19200/38400/115200, default: 9600. Parity None/odd parity/even parity, default: None System Sound Keyboard sound ON/OFF. Default: ON Power Save Power down save function ON/OFF.
-
Page 21: Edit Menu
____________________________________________________________________________ 3.2.2 Edit Menu Press to enter into main menu, then select “Edit” and press “Enter” to pop up sub menu as below: Table 3-2 Edit Menu Layout Edit Sequence Select sequence file number, range 1~10 Back Exit 3.2.3 About Menu Press to enter main menu, then select “About”... -
Page 22: Voltage Slew Rate & Current Slew Rate
3. Select “V_MAX”, “V_MIN”, “I_MAX”, “I_MIN” to set the voltage/current upper and lower limits. 3.4 Voltage Slew Rate & Current Slew Rate FTP3000 series DC power supply supports adjustable voltage slew rate and current slew rate. 1. Press to enter into main menu set interface;... -
Page 23: Cv/Cc Priority Start Function
3.5 CV/CC Priority Start function FTP3000 series power supply provides CC priority and CV priority start function, which forces the power supply to operate in CC or CV mode at the moment the output is turned on, effectively avoids the current or voltage overshoot resulted from capacitive or inductive load. -
Page 24: Output On/Off Control
3.7 Analog Programming FTP3000 series DC power supply provides optional analog interface at its rear panel. Users are able to control the power supply’s output voltage, output current through external 0 ~ 5V DC voltage. Figure 3-6 Analog Programming Wiring... -
Page 25: Trigger
OFF . ---------------------------------------------------------------------------------------------------------------------- 3.8 Trigger FTP3000 series power supply provides three triggering sources: Keyboard trigger, press to implement a trigger; External trigger, analog interface PIN 11 can be configured as trigger signal input (“APG” menu set as “Trigger”), a lower level pulse input at PIN 11 can trigger, see “3.12 External Control”... -
Page 26: Protection
____________________________________________________________________________ 3.9 Protection FTP3000 series power supply provides comprehensive protection functions, some of them are user adjustable protection functions and it is possible to set an protection threshold, while others are not. The adjustable protection functions includes protections against overvoltage (OVP), overcurrent (OCP), overpower (OPP), foldback, reverse voltage (RVP), low voltage (LVP), communication time out (Over time). - Page 27 ____________________________________________________________________________ Overcurrent protection (OC/OCP) It has two kinds of overcurrent protection: hardware overcurrent (OC) and software overcurrent (OCP). Hardware overcurrent protection (OC): It is triggered once the output current exceeds 110% rated output current, and “OC” is prompted on display. ...
-
Page 28: Save And Recall
3.10 Save and Recall FTP3000 series provides users with up to 20 memory locations for saving parameters used in CV/CC output mode, users are able to save output voltage, output current, voltage slew rate, current slew rate, OVP threshold into specified locations for future recall and usage. -
Page 29: Shortcut Recall
10). 3.11 Power Save & Power On Auto Output FTP3000 series provides power save function, this feature determines the initializing parameters when power supply is powered on, there are two choices: ● On, use the parameter setting in last power-off;... -
Page 30: External Control
------------------------------------------------------------------------------------------------------------------------------------------ 3.12 External Control FTP3000 series power supply analog interface PIN11 provides an input “INHIBIT” for external control signal, the port receives 5V TTL level signal, low level effective, filter time is about 20 milliseconds. Figure 3-15 External Control Wiring... -
Page 31: Output Mode & Status Digital Signal Output
3.13 Output Mode & Status Digital Signal Output FTP3000 series optional analog interface provides power supply output mode and working status digital signal output. The port outputs TTL level signal. ● Output mode signal port, PIN9. The port outputs low level TTL signal if power supply work under CV mode, high level TTL signal if under CC mode;... -
Page 32: Seq (Sequence) Test Setting
FTP3000 Series Programmable DC Power Supply Operation Manual ____________________________________________________________________________ In locked state, only key is valid, all other keys are disabled, at the same time, parameter setting area background color is gray. 3.15 SEQ (Sequence) Test Setting For sequence test function, the corresponding set menu option is "Sequence". The sequence feature allows users to program a list of steps into the power supply’s internal memory and execute them. - Page 33 ____________________________________________________________________________ 4. Set “Length”, press to validate it, the editing cursor will move to “Cycle” automatically; 5. Set “Cycle”, press to validate it, the editing cursor will move to “Link” automatically; 6. Set “Link”, press to validate it, the editing cursor will move to “SEQ Step” automatically; 7.
-
Page 34: Constant Power Output (Cp) Setting
3.16 Constant Power Output (CP) Setting FTP3000 series power supply supports constant power output function. After the output is turned on, the power supply continuously adjusts the output voltage or output current to keep the output power constant. If the load exceeds the regulation range of the power supply, the output will remain at the maximum set value. -
Page 35: Internal Resistance Simulation (Resi)
Since a battery has internal resistance, its output voltage will decrease along with the increasing output current. FTP3000 series power supply provides internal resistance simulation feature to imitate the output characteristics of batteries, the power supply output voltage satisfy below formula: : Actual output voltage;... -
Page 36: Ramp Output
RESI simulating battery inner resistance, range 0 ~ Vmax/Imax 3.18 RAMP Output FTP3000 series power supply allows for output voltage ramp-up and ramp-down according to the set slew rate. RAMP test function has three different test ways: Continuous (CONT), pulse (PULS) and toggle (TOGG). - Page 37 ____________________________________________________________________________ Figure 3-23 RAMP Test Continuous Way 1. Set “Way” as CONT; 2. Set “CV-1” and “CV-2” output voltage value; 3. Set “Width-1” and “Width-2” output last time; 4. Set “Slew-UP” and “Slew-DN”; 5. Set output current “CC”. 6. Press to start RAMP test.
-
Page 38: Sound
● On, there is beep sound if you press the key or rotate the rotary knob. ----------------------------------------------------------------------------------------------------------------------- There is always protection alarm sound, even if you turn off sound in parameter set. ----------------------------------------------------------------------------------------------------------------------- 3.20 Language FTP3000 series display screen supports simplified Chinese, traditional Chinese, English. - 36 -... -
Page 39: Communication Introduction
4.1 Communication Interface 4.1.1 RS232 FTP3000 series uses a default baud rate of 9600bps, parity is none, does not support flow control method. Regarding RS232 interface, only TxD and RxD PIN can transmit data, its PIN are explained as following: Table 4-1 RS232 PIN signal Pin NO. -
Page 40: Can
FTP3000 Series Programmable DC Power Supply Operation Manual ____________________________________________________________________________ 4.1.3 CAN The FTP3000 series CAN interface adopts 500kbps communication speed, its device address can be set in power supply. Figure 4-1 Set Device Address ----------------------------------------------------------------------------------------------------------------------- CAN interface uses CANopen protocol. -
Page 41: Communication Protocol
4.3.2 Modbus Protocol For specific content of Modbus protocol, please refer to "FTP3000 Programming Manual Modbus Edition" ---------------------------------------------------------------------------------------------------------------------- FTP3000 series DC power supply support Modbus-RTU only. ---------------------------------------------------------------------------------------------------------------------- 4.3.3 CANopen protocol For specific content of CANopen protocol, please refer to "FTP3000 Programming Manual CANopen Edition"... -
Page 42: Troubleshooting
Follow the actions described in this chapter to inspect the instrument and troubleshoot the problem if the FTP3000 series DC Power Supply does not operate normally. Contact Faithtech authorized agent or Faithtech after-sales if the information provided in this manual does not resolve the problem. -
Page 43: Appendix
Rated Current (A) 2.08 3.31 5.26 8.36 13.3 21.1 26.7 33.6 42.4 53.5 67.4 0000 Shenzhen Faithtech CO., LTD. ADD: 3C, Building 1, Saitu Digital Industrial Park, No.137 Bulan Road, Longgang District, Shenzhen, China Tel: (0086) 400-616-0086 Web: www.faithtech.cn - 41 -...
Need help?
Do you have a question about the FTP3000 Series and is the answer not in the manual?
Questions and answers