Advertisement
INSTALLATION
IMPORTANT!!! PLEASE READ BEFORE INSTALLATION
1. If the unit has recently been transported please let unit stand still for a
minimum of 24 hours before plugging it in.
2. Make sure that the unit drops down to desired temperature before products.
3. Make sure that there is proper ventilation around the unit.
4. Make sure all accessories are installed (i.e. shelves, shelf clips, casters) before
plugging the unit in.
5. Please read through the operation/ owners manual. Lack of maintenance or
misuse of the unit will VOID warranty.
6. Before you start to install your Iceblue unit, carefully inspect it for freight
damage. If damage is discovered, immediately file a claim with the delivery
freight carrier.
CABINET LOCATION GUIDELINES
1. Install the unit on strong and leveled surfaces.
-
Unit may make unpleasant noises if surface is uneven.
-
Unit may malfunction if surface is uneven
2. Install the unit in an indoor, well ventilated area
-
Unit performs more efficiently in a well- ventilated area
Make sure to maintain a clearance of 24" above the unit
-
-
Outdoor use may cause decreased efficiency and damage to the unit
3. Avoid installation in high humidity or dusty area
-
Humidity could cause unit to rust and decrease efficiency of the unit.
-
Dust collected on condenser coil will cause unit to malfunction. Clean
the condenser at least once a month with a brush or clean cloth.
-
Malfunction due to dirty condenser will void warranty
4. Select a location away from heat and moisture – generating equipment
-
High ambient temperatures will cause the compressor to overwork,
leading to higher energy bills and gradual breakdown of the unit.
-
Malfunction due to high ambient temperature will void warranty.
ELECTRICAL
Advertisement
