Related Manuals for neabot NoMo Q11
Summary of Contents for neabot NoMo Q11
- Page 1 Neabot NoMo Q11 USER GUIDE GUIDE DE L'UTILISATEUR GEBRAUCHSANWEISUNG 取扱説明書 用户指南 简...
-
Page 3: Table Of Contents
User Guide 取扱説明書 • Safety Information • 安全情報 67-68 • Package Includes • パッケージに含まれるもの • About Your Robot Vacuum • ロボット掃除機について 70-73 • About Your Self-Emptying Dustbin • 自動ゴミ収集ボックスについて • Get Started 9-12 • 掃除開始 75-78 • Trouble Shooting • トラブルシューティング •... -
Page 4: Safety Information
Safety Information General Warning • Your robot is not a toy. Small children and pets should be supervised when your robot is operating. • Do not sit or stand on your robot or charging station. • Do not use unauthorized chargers. Use of an unauthorized charger could cause the battery to generate heat, smoke, catch fire, or explode. - Page 5 Safety Information Battery & Charging Warnings • Do not use a charging station with a damaged cord or plug. If the cord or plug is damaged, it must be replaced. • Always disconnect your robot from the charging station before maintenance. •...
-
Page 6: Package Includes
Self-Emptying Dustbin*1 Accessories： Side Brush*2 Dust Bag*2 Cleaning Brush*1 （next to the dust box on the robot） HEPA*1 Mop Cloth*2 （can be used repeatedly） Note: If you find something missing in your package, please contact customer support via support@neabot.com in time. -
Page 7: About Your Robot Vacuum
In shutdown mode, long press for 5s to turn on. In standby mode, long press for 5s to shut down. Note: when the neabot is charging on the charging station, it will automatically turn on, and it cannot be turned off during charging. - Page 8 About Your Robot Vacuum Top View Speaker Built-in lidar Linging LiDAR Dust box release button Air outlet Integrated Water tank dust box Bottom mop release button...
- Page 9 About Your Robot Vacuum Side View Force shutdown button Short press to close Bottom mop release button Bottom View Front casters wheel Right brush Cliff sensor Right drive wheel Left drive wheel Main brush...
- Page 10 About Your Robot Vacuum About Your Dust box Mop board bracket Dust box Bottom mop release button Cleaning Brush Dust box release button Dust box buckle Water inlet Shell Hepa Filter Mop Cloth Hepa Filter Bracket HEPA Filter sponge Hepa Filter Bracket Cover...
-
Page 11: About Your Self-Emptying Dustbin
About Your Self-Emptying Dustbin Front View Top View Flip cover Flip cover Dust container sealing ring Indicator light Dust collection handle Infrared mirror Fan filter bracket Charging contacts Trash port Back View Bottom View Dust channel (perspective view) Power cord... -
Page 12: Get Started
Get Started 1. Get Ready After operating according to ①②③④ on the quick installation guide： 1. Take out the electric water 2. Open the cover of the water 3. Put on the water inlet cap. tank. injection port and inject clean water. (In order to extend the service life of the water tank, It is recommended to use purified water or softened water) - Page 13 Note: Do not place the charging station in direct sunlight. 4. App Setup Neabot Scan the QR code to download the APP , or search for "Neabot" in the mobile App store to download the App.(Please do not download the "Neabot Home" APP)
- Page 14 5. Go to the mobile phone WLAN list and switch your 6. Return to the App and wait 1-2 minutes to WiFi to Neabot hotspot. complete the connection. (at this time Neabot will (displays as Neabot_NoMo_XXX) flash Blue light quickly) Hello,XXX Welcome home.
- Page 15 • Manual charging:When the neabot is powered off, you can manually put it back into the charging station to charge. Note: It takes Neabot up to 4-6 hours to reach a full charge. The battery will typically last 120 mins. This also depends on the power mode you use and the floor type in your home.
-
Page 16: Trouble Shooting
If you have other questions or comments about your robot vacuum, You can start by visiting www.neabot.com for support tips, frequently asked questions and information about accessories. This information can also be found in the Neabot App. If you need further assistance, contact us via support@neabot.com... -
Page 17: Care And Maintenance
Front Caster Wheel Every 12 months Sensors and Clean once a month Charging Contacts Note: Neabot manufactures various replacement parts and assemblies. If you think you need a replacement part, please contact us via support@neabot.com or visit neabot.com Replacement frequency may vary. Parts should be replaced if visible wear appears. - Page 18 Care and Maintenance Replacing Bags Open the cover Pull up the dust bag Throw away Replace with a Close the through its handle the old one new one flip cover Transparent cover for Clean the dust collection pipe dust collection pipe If the dust bag is full, or the dust bag reports “Dust bag is full”...
- Page 19 Care and Maintenance Cleaning the Main Brush (recommended weekly) 2. Remove the main brush upwards 1. Rotate the host, press the buckle, and then remove the brush cover. clean the entangled hair and debris with a cleaning brush. Middle sweep cover Main brush Note: If you hear abnormal sound from the main brush during cleaning process, please check if the main brush is stuck.
- Page 20 Care and Maintenance Cleaning Side Brush 1. Remove the side brush. 2. Remove any hair or debris, then reinstall the side brushes. Note: When you hear the side brush report an error, please first check whether the side brush is entangled with hair or something, and then move the side brush by hand to check whether there is any abnormality, and then remove the side brush for inspection.
- Page 21 Care and Maintenance Cleaning Dustbin and Filter 1. Press the dust box release button to remove the 2. Open the dust box and dump out the dust box. garbage. 3. Open the dust cover and remove the filter. 4. Shake off the trash on the filter net and use a cleaning brush to clean the dust box and filter.
- Page 22 Care and Maintenance Cleaning the Front Caster Wheel Cleaning Sensors and Charging Contacts • Pull firmly on the front wheel module to remove it from the robot. Wipe sensors with a clean, dry cloth, including: • Pull firmly on the wheel to remove it from its housing. •...
- Page 23 Care and Maintenance Cleaning the Self-Emptying Dustbin Check the sensor and charging contacts to make sure Clean the fan filter bracket and dust collection they are clean and not dirty, wipe them with a clean dry cavity. cloth. Note: Do not spray the cleaning solution directly on the infrared mirror or the opening of the infrared mirror.
-
Page 24: Warranty
Warranty Warranty Overview Neabot (Hereinafter referred to as ‘Us’) warrants that, subject to the exclusions and limitations set out below, this Product (including batteries if applicable) shall be in good working order during the period of one (1) year from the date of purchase (the ‘Warranty Period’). - Page 25 Warranty What Is Not Covered? Unless agreed in writing, the limited warranty will not apply if the defect(s) relate to: • normal abrasion. (Including but not limited to main brush, side brush, sea Pa, battery, etc. wear, if applicable) • Defects caused by rough or inappropriate handling or use or damage caused by accident, misuse, neglect, fire, water, lightning or other acts of nature.