Fisher & Paykel DD90STI2 Quick Start Manual page 2

How to attend to a fault - Classic models
◦ How to attend to a fault - Designer models
◦ How to attend to a fault - Integrated models with badge
◦ How to attend to a fault - Integrated models with remote control
◦ Warranty and service
◦ Wash program data
◦ New Zealand and Australia
• Installation Guide DD90STI2
No image available
◦ Follow the Installation Sequence Relevant to your Model
◦ Safety and Warnings
◦ Parts Supplied
◦ Product Dimensions
◦ Cabinetry Dimensions
◦ Integrated Models with Remote (NZ AU) Only - Custom Front Panel Calculations
◦ Integrated Models with Badge (GB IE) Only - Custom Front Panel Calculations
◦ Cavity Preparation
◦ Maximum Distance of Hoses & Cord from Chassis Edge
◦ Installation Method
◦ Integrated Models with Remote (NZ AU) ONLY - Installing the Front Panels
◦ Integrated Models with Badge (GB IE) Only - Installing the Front Panel & Badge Controls
◦ Adjust Panel Height to Align the Cabinetry Gaps
◦ Choose Suitable Plumbing and Drainage Option
◦ Connect Inlet Hose to Cold Water
◦ Plug Product In
◦ Final Checklist
◦ Troubleshooting
• Parts Manuals
No image available
◦ Parts Manual DD90STI2 (80778-A)
◦ Parts Manual DD90STI2 (80903-A)
• Quick Start Guide DD90STI2
No image available
https://producthelp.fisherpaykel.com/au/Clean/DishDrawer%E2%84%A2/Integrated_Single/DD90STI2
Updated: Wed, 08 Dec 2021 07:43:23 GMT
Powered by
2