MEKANIKA Evo-S User Manual page 2

MAINTENANCE
GENERAL INFORMATION
Prior to commissioning the Evo CNC Milling Machine, it has to be ensured that the machine is in a technically
perfect and well-maintained condition. Always ensure that the machine is not powered if you want to perform
adjustment or maintenance works. For this purpose, disconnect the power plug.
Sharp-edged cutting tools must also be dismounted prior any maintenance work to avoid a risk of injury.
Remove workpieces you have clamped onto the machine table, including the clamping system.
Only use high quality tools during your maintenance work.
RECOMMENDED MAINTENANCE WORK
The Evo CNC machine is, to a good extent, maintenance-free. Handle your CNC system with
care in order to ensure a long service life. Regular maintenance has a substantial impact on the service life of
your machine. Frequently clean the CNC system with a cloth.
Often inspect the slots of the aluminium profiles, where the wheels are moving, for any debris, dust or stuck
chips.
Clean the electronic devices, including the screen and keyboard from dust and impurities.
Regularly clean the fan filter of the control unit. A clogged filter might result in overheating inside the box, po-
tentially leading to permanent damage to the electronic components.
SPARE PARTS
All parts of the machine and of the control unit can be purchased individually as spare parts.
Please contact us directly about this.
When ordering spare parts, please provided the information on the machine model, size and part number avail-
able in accordance with the building instructions.
19