Page 1
Multifunction Network Test Box (RJ45-RJ11-USB) User Manual...
Page 2
Introduction: The LAN/USB Cable Tester is designed to easily read the correct cable pin out configuration。 The cables include the USB (A/A), USB (A/B)、BNC 10-Base-T, 100Base-TX、 1000Base-TX, Token Ring, AT&T 258A、Coaxial、EIA/TIA 568A/B and RJ11/RJ12 modular cables. Just connect the cable both sides with CT-168. If you want to test cable installed far away, either on patch panel or wall plate, simply use the Remote terminator.
Page 3
Appearance: RJ45 TX Port: Link to RX port (2 or 7). RJ45 RX Port: Link to TX port (1). USB B Port: Link to USB RX port (5 or 6). UAB A Port: Link to USB RX port (5 or 6). UAB A Port: Link to USB TX port (3 or 4).