Software Installation - IOGear GUF320 Quick Start Manual

Step. 6
Use a non-magnetic screwdriver to unscrew and remove the PCI slot's metal cover.
Step. 7
Slide the IOGEAR Hi-Speed USB 2.0/FireWire
slot.
Step. 8
Install the locking-screw to secure the IOGEAR Hi-Speed USB 2.0/FireWire
Combo Card into the computer, then close the computer case.

5. Software Installation

FOR WINDOWS
Step. 1
Assuming your computer is already booted-up, and sitting at the Windows
desktop, please insert the IOGEAR CD-ROM that was included with your
IOGEAR USB 2.0/FireWire PCI Card
®
98SE & ME
Combo Card into the open PCI
®
®