Page 1
SAMWAY www.samway.com samwaysales@gmail.com MANUALE D’USO E MANUTENZIONE-USE AND MAINTENANCE MANUAL-MANUEL D’UTILIZATION ET DE MAINTENANCE-MANUAL DE USO Y MANTENIMIETO-BETRIEBS UND WARTUNGSANWEISUNG AUTOMATIC CUTTING MACHINE C400...
SAMWAY www.samway.com samwaysales@gmail.com CONTENTS Picture 1 Page 3 Picture 2 Page 4 Picture 3 Page 5 Electric system diagram 220/380 three phases Page 6 Electric system diagram 220 v singlephase Page 7 Supply Terms/warranty Page 9 Stetement of acceptance of the machine...
SAMWAY www.samway.com samwaysales@gmail.com SCHEMA ELETTRICO TRIFASE ELECTRIC SYSTEM TREE PHASES SCHEMA ELECTRIQUE TROIS PHASES ESQUEMA ELECTRICO TRIFASICA SCHALTPLAN DREIPHASIG 400V 50-60Hz MOTORE 3Kw 400V 50Hz MOTOR 3Kw 400V 50Hz MOTEUR 3Kw 400V 50Hz MOTOR 3Kw 400V 50Hz CONTRODADO PER PG16 JAM NUT CONTRE èCROU...
SAMWAY www.samway.com samwaysales@gmail.com SCHEMA ELETTRICO MONOFASE ELECTRIC SYSTEM SINGLE PHASE SCHEMA ELECTRIQUE MONOPHASE ESQUEMA ELÉCTRICO MONOFASICA SCHALTPLAN EINPHASIG 220V 50-60Hz DESCRIZIONE DESCRIPTION DESCRIPTION DESCRIPTION BESCREIBUNG Interruttore Motorsave switch Disjoncteur Interr. Überlastsicherungs salvamotore Protège-moteur guardamotor schalter Motore elettrico 220 V Singlephase Moteur motor eléctrico...
Page 8
SAMWAY www.samway.com samwaysales@gmail.com SCHEMA MONTAGGIO GUIDA RULLO E CONTAMETRI ROLLING GUIDES AND COUNTMETERS ASSEMBLY ASSEMBLÉE DE COUNTMETERS ET GUIDES DE ROULEMENT ASAMBLEA DE CONTAMETRI Y GUÍAS DEL BALANCEO ROLLEN-FÜHRER UND COUNTMETERS...
SAMWAY www.samway.com samwaysales@gmail.com Supply Terms/Waranty at the rate established in Legislative Decree n.231/2002 The Supply Agreement becomes final when the Supplier confirms the acceptance of the order in writing. During the pre-contractual phase, the Customer must infrom the supplier of sll specific local provisions that need to be met in the country to which the machine is designed to be used.
IF, FOR ANY REASON, THE MACHINE DOESNT HAVE THE QUALIFICATIONS ABOVE MENTIONED FROM POINT 1 TO 8 AND IN PARTICULAR ONE HASNT GOT KNOWLEDGE OF THE RESIDUAL RISKS CONNECTED TO THE USE, PLEASE CONTACT THE FIRM SAMWAY Tel: 0086-510 8378 8458; Mobile: 0086 13812022928; e-mail: samwaysales@gmail.com...
SAMWAY www.samway.com samwaysales@gmail.com SAFETY REGULATIONS Although the machine is strong and easily transported, care must always be taken to place it in an absolutely safe working position resting on a solid surface Always work in safe conditions and with the necessary space around the machine.
SAMWAY www.samway.com samwaysales@gmail.com 16. Our equipment is designed with the technical safety features required; customers are advised to comply strictly to comply strictly with the instructions given in this manual. 17. Moving parts must be kept clean and well greased.
SAMWAY www.samway.com samwaysales@gmail.com TECHNICAL/DIMENSIONAL DATA C400 220/380 V C400 220 V SINGLE THREE PHASES PHASE Cutting range 3/16” - 2” 3/16” - 2” Motor power (KW) Dimensions (LxDxH in mm) 840x550x1150 840x550x1150 Controls Electric Electric Voltage (Volts) 220-380V/50Hz 220V-50Hz 255-440V/60Hz...
SAMWAY www.samway.com samwaysales@gmail.com ROUTINE MAINTENANCE Ensure that moving parts are always lightly greased (type of grease suggested Kluber Staburags NBU 30 ). Check periodically the blade sharpness and if necessary replace the blade Verify periodically the wear, tear and readability of the warning signs.
SAMWAY www.samway.com samwaysales@gmail.com STATR-UP MAKE SURE that the “PRELIMINARY CHECKS” have been carried out properly. The machine is now ready to be put into operation: Connect the machine to the electricity supply. Press the ON button of the push buttons box.