Every operator using the machine MUST read the following instructions before operating. SAMWAY Machine declines any responsibility for damage to persons, things or to the machine itself, arising from its incorrect use, negligence and superficial interpretations of safety concepts in this manual.
C300 USER MANUAL EDITION 2019 www.samway.com 2. General precautions Always make sure in advance that the minimum safety, placement and operating standards are respected, taking note of the environmental conditions, temperature, humidity, lighting, vibrations, suspended dust and the appropriateness of the area to be occupied.
When unpacking the cutting machine, make sure that the machine is in perfect condition and that the package contains the parts described. SAMWAY Machine does not respond for errors or missing parts not reported to SAMWAY Machine following eight (8) days after shipment.
The hose cutting machine must only be used for hydraulic hose compatible with the specifications below. Follow the environmental conditions and limitations recommended by SAMWAY Machine and current health and safety regulations. NOTE! The descriptions includes the use for which the machine has been designed, built and protected.
C300 USER MANUAL EDITION 2019 www.samway.com 5. Starting - up 5.1 Preliminary steps Important! It is essential to determine size measurements and placement in advance in order to ensure safe placement, running and emergency actions within the surrounding environment. These conditions should be respected beginning with the preliminary stages, before cutting begins.
C300 USER MANUAL EDITION 2019 www.samway.com 6. Hose cutting 6.1 To maximize the lifetime of the cutting blade 1. The ten first cuts on a new cutting blade should be cut with a very low feed speed. 2. After these ten first cuts, the cut should be fast but without overloading of the motor.
C300 USER MANUAL EDITION 2019 www.samway.com 7. Maintenance 7.1 Replacing the cutting blade Warning ! Always use protective gloves when changing the cutting blade. Disconnect the electric supply. ● Open the lid on the back side and the lid on the right hand side.
C300 USER MANUAL EDITION 2019 www.samway.com Handle for liftning Handle Prebend support Motor Back lid Lid for cleaning of cutting blade Smoke evacuation connection Cut table Adjustable feet Control panel samwaysales@gmail.com Page 10 sales@samway.com...