Running The Transmitter Standalone - ZachTek WSPR Quick Start Manual

Running the Transmitter standalone

1. The WSPR Transmitter will either start in WSPR Beacon
mode, in Signal generator mode or in idle mode depending on
what the start mode is set to in the configuration program, see
picture.
If it is set to WSPR Beacon, it will continuously transmit as set
in the configuration.
The Yellow status Led will indicate what it is doing at the
moment.
Yellow LED Off= Waiting/Idling
Yellow LED Single blinking=Acquiring position from the GPS
Satellites.
Yellow LED Double blinking=Waiting for top of even minute.
Yellow LED Pulsating rapidly=Transmitting WSPR packet.
I hope this information is enough to get you started and get you on
the air. If you need more information, check out the documentation
pages on my website or email me at harry@zachtek.com.
See you on the bands!
//Harry SM7PNV