1. Manuals
  2. Brands
  3. astrawalker Manuals
  4. Plumbing Product
  5. A81.05
  6. Assemble

astrawalker A81.05 Assemble

Hide thumbs
1
2
3

Advertisement

Table of Contents

ASSEMBLE
A81.05

Installation Instructions

• Tapware to be installed by a licenced plumber in accordance with AS/NZS 3500:2003
• Recommended working water pressure 150 - 500kPa
• Maximum water temperature is 65 deg C
• After completing the installation check function of tapware and ensure no water leaks.
ARCHITECTURAL BATHWARE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A81.05 and is the answer not in the manual?

Questions and answers

Related Manuals for astrawalker A81.05

Summary of Contents for astrawalker A81.05

  • Page 1 ASSEMBLE A81.05 Installation Instructions • Tapware to be installed by a licenced plumber in accordance with AS/NZS 3500:2003 • Recommended working water pressure 150 - 500kPa • Maximum water temperature is 65 deg C • After completing the installation check function of tapware and ensure no water leaks.
  • Page 2 ASSEMBLE A81.05 Installation Instructions Install the wall breech supplied to a secure nogging at the correct depth as shown in the drawing below. Ensure the breech is square and parallel between the wall studs. To allow the tapware to fit correctly the thickness of the finished wall surface must be calculated prior to ‘rough-in’.
  • Page 3 ASSEMBLE A81.05 Installation Instructions Ensure water lines are completely flushed prior to fitting of spindles. Install the spindles hand-tight until the seal of the spindle firmly makes contact with the seat. Do not overtighten. Do not tighten seal using the spindle.

Table of Contents