Thank you for purchasing the MMS1000! MMS1000 is a smart GSMIGPRS remote camera. It helps you achieve remote monitor, alarm and shooting, and thus provides a safe solution for protecting your privacy. You can freely ask the device to take photos and send to your mobile phone or mailbox in slide show by phone call or SMS command any time anywhere.
◆For Your Safety Keep it away from signal interference. Do not use it in any explosive places. Please use the original power adapter to avoid any damage. Keep it out of the reach of children ◆Declaration The information contained in this manual has been carefully checked and is believed to be accurate.
Chapter 1 Product Features Product Features 1. All GSM SIM cards can be used, capable of sending photos taken to MMS service enabled mobile phone or mailbox. 2. Integrated PIR sensor to provide precise and timely alarm 3. Built-in CMOS camera and IR lights: it can take clear images at night 4.
10seconds when in normal status SIM Card Installation Note: MMS1000 supports GSM SIM cards only. Please make sure the caller ID presentation and MMS service is activated. For more info, refer to your SIM card provider.
Send the SMS command to start up: #00# After starting up, you will receive a SMS reply: Welcome! Congratulations on your purchase of MMS1000! You are authorized to use this device. Password: 1234. PDF created with pdfFactory Pro trial version...
2. Arming / Disarming To arm the device is to activate the alarm function, thus the PIR sensor turns to working state. To disarm the device is to deactivate the alarm function, the PIR sensor turns to off working state. There are following two methods: Method 1: Send the SMS command to arm: #01# You will receive the SMS reply “Armed successfully”...
5. Alarm With the built-in PIR sensor, the device can alarm once triggered, default to SMS and MMS. If alarm SMS, MMS and call activated at the same time, it will send alarm SMS and MMS orderly and then make phone calls, once for each. For alarm calls, it will dial the master number first, and then family numbers until answered.
Note: If the problem can’t be solved with the above guidelines, please contact your local dealer or after sales center. PDF created with pdfFactory Pro trial version www.pdffactory.com...
Password is necessary for guest only in the SMS command, default to 1234. PDF created with pdfFactory Pro trial version www.pdffactory.com...
Page 14
PDF created with pdfFactory Pro trial version www.pdffactory.com...
Page 15
PDF created with pdfFactory Pro trial version www.pdffactory.com...
Page 16
PDF created with pdfFactory Pro trial version www.pdffactory.com...
Page 17
I am always here! To protect your privacy safety and security anytime anywhere! Security Wireless Addr.: 5 Vinstra Road, Valhalla, Pretoria, 0185 Tel.: +27 12 654 7895 Fax: +27 86 633 5065 E-mail: info@securitywireless.co.za Website: www.securitywireless.co.za PDF created with pdfFactory Pro trial version...
Need help?
Do you have a question about the MMS1000 and is the answer not in the manual?
Questions and answers