Fisher & Paykel ACTIVESMART RF605QDU Installation Manual page 11

1
2
3
4
WATER CONNECTION (ICE & WATER MODELS)
Ensure the refrigerator is NOT plugged
into a power supply. Locate the isolation
tap for cold water connection (tee and
tap fitting not supplied).
Locate the water fitting kit to complete
water connection installation.
Remove cap from water inlet valve at
the back of the refrigerator.
Connect one end of the water hose
set to the water inlet valve.
5
6
7
Tighten the compression nut until
it is hand tight, then tighten one
additional turn with a spanner.
Fasten the water tap adaptor to
the isolation tap. Take care not to
overtighten the water tap adaptor.
Check the connections, turn on the
water supply and check for leaks.
11