Table of Contents
Advertisement
333mm
13mm
1
60mm -
200mm
max panel thickness: 16mm
2
3
12
INSTALL DUCTING
Prepare the toe kick panel to the
illustrated specifications.
33mm
We recommend sealing the panel
with a waterproof barrier to
prevent any moisture damage.
Align the outlet to the toe kick
panel and adjust the height
to suit. To increase the height,
rotate the foot clockwise and to
decrease, rotate anticlockwise.
Cut any excess thread to remove.
Loosen the screws at the sides
of the outlet and fit the toe kick.
Rotate screws to clamp into
place.
4
5
6
Fit the outlet to the ducting and
tape to secure.
Slide assembly under cabinetry
and slot into the elbow. Tape to
secure.
Cut the vertical ducting to the
required length and slot into the
elbow. Tape to secure.
Advertisement
Table of Contents
