Page 1
MAXTRA ML-44GDRS-ES-E100 ELECTRIC SCOOTER FOR KIDS 6-12 USER MANUAL...
Page 2
Thank you for choosing MAXTRA! Please take a few minutes to read this user manual before using it.This manual will help you better under- stand your scooter and, with proper care, it will provide years of trouble-free use. If you have any questions, please do not hesitate to contact us.
Check List Brake: Check the brakes for proper function. When you squeeze the lever, the brake should provide positive braking action. Make sure that brakes are not rubbing. Frame, Fork and Handlebars: Check for cracks or broken connections. Although broken frames are rare.
Page 5
MAXTRA is responsible for any injuries, damages or legal disputes caused by a rider's inexperience or failure to follow the instructions in this manual.
Page 6
6.Maintain a hold on the handlebars at all times. Do not touch the brakes or motor on your scooter when in use or immediately after riding as these parts can become very hot. 7.Ride defensively. Watch out for potential obstacles that could catch your wheel or force you to swerve suddenly or lose control.
Page 7
Need Help? maxlead.us@gmail.com Please email for support...
Page 8
Need Help? maxlead.us@gmail.com Please email for support...
Page 9
Note 1. Charge immediately after receiving the product. 2. After plugging the charger into the socket, the green light will light up, indicating that the charger is normally connected.When the charging port is connected to the scooter, the red light of the charger lights up, indicating that it is charging.
Maintenance Tips 1. Charge immediately after each use. 2. Even when not in use, it must be charged every 60 days to protect the battery. 3. Do not let the scooter discharge deeply.When not in use, make sure the scooter's power switch is turned off.
Page 11
Controller Information The controller is the core part of the power control of scooter.If something goes wrong with your scooter, you can see the motorcycle's status by watching the power LED light flash. Scooter Troubleshooting Status Status 1.Check that the battery and wires are properly connected 2.Check whether the power switch is in Controller...
Page 12
Power Switch: When the switch is placed in "O", it is in the power off state;When the switch is placed in "-", it is in the energized state. At the same time, the red status indicator beside the switch is on. At this time, the vehicle can be started as long as the accelerating handle is rotated.
Page 13
Tips Scooters are consumable, with certain parts requiring regular maintenance and replacement 1.Turn off the power and charge it after use 2. Regularly tighten the driving belt to reduce belt shedding and damage 3. Check the tightness of all screws regularly to reduce noise 4.
Need help?
Do you have a question about the ML-44GDRS-ES-E100 and is the answer not in the manual?
Questions and answers