E2 Lighting E2-T806-Y01-9 User Manual

LED T8 9W (2ft) 18W(4ft) EBBU Bypass tube
Test bu on: Press the test bu on to check the emergency
func on. When connected with AC power for 8 seconds,
press this button, lamp will be in emergency status.
Green lamp
Red lamp on:
ba eries
are full charged.
Yellow lamp on:
retailer
when yellow light turns on).
Blue lamp
A en on:
Before installation, please make sure power off
1.
Emergency test switch is optional. Installed or not depends on
2.
local fire requirements.
Note: If installed emergency test switch, after correct wiring, please
make sure the emergency test switch is on all the time.
E2's emergency LED tubes need to identify AC end and
3.
Emergency end.
Remark: the end with test button and indicator lamps is emergency
end( EM) and another end is AC end(AC)
At each end, live and neutral wires can go to either pin
4.
Both the AC and EM end supplied with a AC 100-277V voltage
5.
supply
Product Number
Model: E2-T806-Y01-9
Model: E2-T812-Y01-18
E2 Lighting International, Inc. | Phone: 415-670-9362 | Fax: 415-704-4467 | Web: www.e2lightingusa.com | E-mail: sales@e2lightingusa.com | 2017
PROJECT NAME:_____________________________ CATALOG NUMBER:__________________________
NOTES:______________________________________FIXTURE SCHEDULE:_________________________
on: AC power(AC100-277V)connected.
Ba. eries is charging, it will turn off when
Tube is on malfunc oned. (Please call
on: Sensor is working.
Wattage Color
Certifications
4000K/
ETL
9W
5000K
4000K/
ETL
18W
5000K
PRODUCT DESCRIPTION:
E2 T8 Emergency battery back up and sensor
( microwave or PIR) LED tubes are an energy savings
product used as a special replacement for traditional
fluorescent T8 lamps. This lamp has test buttons and
indicator that is safe with fire protection standards. ETL
listed and RoHS..
FEATURES:
• Emergency battery back up for 90 mins. or 1.5 hrs
• Test button for Emergency
• Light inductors: Power, Battery Charging, Sensor
and Malfunction
• Aluminum and plastic body for efficient heat sink and
even light distribution
• Internal isolated driver
• Built-in Lithium batteries with over-charging and over
RoHS
discharging protection: Ensuring the lift time of the
COMPLIANT
battery (800 times charging and discharging)
• Single end or Two end power by pass connection
• No distortion and no yellowing light
• Lumens output greater than 104 lm/W
• 50,000 Hours L70 Lifespan
• ETL listed for motion senor and battery back up
APPLICATION:
• Linear Replacement Lamp
• Office, Parking Garage, Commercial and Industrial
Building Applications
TESTED DATA:
• Light Output: 1080 lm, 1900lm
• Wattage: 9W, 18W
• Efficacy: >105 lm/W
• Power Factor: >0.90
• CCT: 4000K, 5000K
• CRI: >80
• THD: <20 %
• Frequency: 50-60Hz
• Input Voltage: AC100-277V
• Working Environment: –20ºF-113ºF
• Beam Angle: 220º
• Mercury Content: No Hg
• Lens: Aluminum and Plastic
WARRANTY:
E2 warrants that our LED products will be free from defects in
materials and workmanship for a period of five (5) years from
the date of delivery to the end user, including coverage of light
output, color stability, driver performance and fixture finish.
Please see our complete warranty terms located at
www.e2lightingusa.com.
Dimmable Voltage
AC100-
Yes w/ motion
sensor 277V
AC100-
Yes w/ motion
sensor
277V
Working
Lumens CRI
Hours
1080m
50,000hrs >83
1900m 50,000hrs >83
Page: 1 of 3