FERREX S019 User Manual
  1. Manuals
  2. Brands
  3. FERREX Manuals
  4. Power Screwdriver
  5. S019
  6. User manual

FERREX S019 User Manual

3.6 v lithium-ion cordless screwdriver
Hide thumbs
Table of Contents

Advertisement

Quick Links

Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly. In
the event of product failure within its intended use over the course of the
first 3 years after date of purchase, we will remedy the problem as quickly
as possible once it has been brought to our attention. In the unlikely event
of such an occurrence, or if you require any information about the product,
please contact us via our helpline support services, details of which are to be
found both in this manual and on the product itself.
GB
IE
PRODUCED IN CHINA FOR:
ALDI STORES LTD. PO BOX 26, ATHERSTONE
WARWICKSHIRE, CV9 2SH
ALDI STORES (IRELAND) LTD.
PO BOX 726, NAAS, CO. KILDARE
Visit us at www.aldi.com
AFTER SALES SUPPORT
+44(0) 1904727501
GB
+353(0) 19022605
IE
support@coreservice.co.uk
MODEL:
S019
806696
3
YEAR
09/2021
WARRANTY
User Manual
3.6 V LITHIUM-ION
CORDLESS SCREWDRIVER
Original User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S019 and is the answer not in the manual?

Questions and answers

Related Manuals for FERREX S019

Summary of Contents for FERREX S019

  • Page 1 ALDI STORES LTD. PO BOX 26, ATHERSTONE WARWICKSHIRE, CV9 2SH ALDI STORES (IRELAND) LTD. PO BOX 726, NAAS, CO. KILDARE Visit us at www.aldi.com AFTER SALES SUPPORT 806696 +44(0) 1904727501 +353(0) 19022605 support@coreservice.co.uk MODEL: YEAR Original User Manual 09/2021 WARRANTY S019...

  • Page 3: Scope Of Delivery/Device Components

    Scope of delivery/device components Scope of delivery/device components Cordless screwdriver Charger Bit holder Bit set Storage box User manual and warranty card (not depicted)

  • Page 4: Table Of Contents

    Table of content Table of content Overview....................2 Scope of delivery/device components............3 General information................5 Reading and storing the operating manual..........5 Proper use......................6 Explanation of symbols................6 Safety......................7 Before first use..................20 Operation....................21 Charge Battery....................22 Displaying the charge state.................24 Inserting bits....................24 Turning the device on and off..............26 Left/right rotation switch and switch lock..........

  • Page 5: General Information

    General information General information Reading and storing the operating manual This user manual is part of the 3.6 V lithium-ion cordless screwdriver (hereinafter also called "device"). It contains important information on how to set up and use the device. Before using the device, read the operating manual carefully, in particular the safety instructions.

  • Page 6: Proper Use

    General information Proper use The device is intended for inserting and removing screws in/from wood and wood-like materials. This device is intended for private use only and is not suitable for commercial use. Use the device only as described in this operating manual.

  • Page 7: Safety

    Explanation of symbols The new UKCA (UK Conformity Assessed) marking declares that the product conforms to all applicable U.K. legislative requirements and that appropriate conformity assessment procedures have been successfully completed. The “GS” (Tested Safety) certification mark confirms the device’s compliance with the German Product Safety Act (ProdSG for short).
  • Page 8 Safety WARNING! This signal symbol/word denotes a hazard with an average risk level that could lead to death or severe injury if it is not avoided. CAUTION! This signal symbol/word denotes a hazard with a low risk level that could lead to mild or moderate injury if it is not avoided.
  • Page 9 Safety instructions below may result in electric shock, fire and/or serious injury. Keep all safety notes and instructions for future reference. The term "power tool" used in the safety notes refers to both mains-operated power tools (with power cord) and battery-powered power tools (without power cord).
  • Page 10 Safety Electrical safety - Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed Unmodified (grounded) power tools. plugs and matching outlets will reduce risk of electric shock. - Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.
  • Page 11 Safety while operating power tools may result in serious personal injury. - Use personal protective equipment. Protective Always wear eye protection. equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries. - Prevent unintentional starting.
  • Page 12 Safety better control of the power tool in unexpected situations. - Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. - If devices are provided for the connection of dust extraction and collection facilities, ensure these are...
  • Page 13 Safety The right power tool allows you to work better and safer in the specified power range. - Do not use any power tool that has a Power tools that can no defective switch. longer be switched on or off are dangerous and must be repaired.
  • Page 14 Safety dangerous if used by inexperienced persons. - Power tools and insert tools must be subject to careful maintenance. Check whether moving parts function properly without jamming, and whether parts are broken or damaged to such an extent that they impair the functions of the power tool.
  • Page 15 Safety those intended can lead to dangerous situations. - Keep handles and grip surfaces dry, Slippery clean and free of oil and grease. handles and grip surfaces hinder safe operation and control of the power tool in unforeseen situations. Using and handling the cordless tool - Only charge the batteries using chargers recommended by the Chargers suitable for a...
  • Page 16 Safety may behave unpredictably and cause fire, explosion or injury. - Do not expose batteries to fire or Fire or excessive temperatures. temperatures above 130 °C may cause an explosion. - Follow all charging instructions and never charge the battery or cordless tool outside the temperature range specified in the operating manual.
  • Page 17 Safety performed by the manufacturer or authorized service providers. Additional safety notes for power tools - Keep the device and its accessories away from hot surfaces. - Do not let inexperienced persons use the device and its accessories. - Persons with physical or mental impairments must not use the device and its accessories unsupervised.
  • Page 18 Safety knowledge may use the charger if they are supervised or have been given instruction on using the device in a safe way and understand the hazards involved. - Children are not allowed to play with the device or with the power cable. - Cleaning or user maintenance must not be undertaken by children unless supervised.
  • Page 19 Safety - Do not charge non-rechargeable batteries. - Keep the charger away from any type of moisture. - Never use the charger in environments where there are explosive or flammable materials. There is a risk of fire and explosion. - Do not place objects on top of the charger and do not cover the charger.

  • Page 20: Before First Use

    Safety - Unplug the charger from the power supply before cleaning, servicing, storage and transport and allow it to completely cool down. Before first use Check the device and scope of delivery NOTE! Risk of damage! If opening the packaging with a sharp knife or other pointed objects, careless handling can damage the device.

  • Page 21: Operation

    Before first use CAUTION! Risk of injury! A damaged device or damaged accessories can lead to injuries. - Check the device and the accessories (see section "Testing"). CAUTION! Risk of injury! The tool bit heats up during operation. - Do not touch the tool bit until it has cooled down again. Operation This chapter describes how to operate the device.

  • Page 22: Charge Battery

    Operation Charge Battery WARNING! Risk of electric shock! A faulty electrical installation, excessive line voltage, or incorrect operation may result in an electric shock. - Only connect the battery charger to an easily accessible outlet so that you can quickly disconnect it from the power supply in the event of a problem.
  • Page 23 Operation 1. Plug the mains adapter of the charger into the socket. 2. Plug the power connector of the charger into the charge socket The battery charge indicator flashes during charging and indicates the current charge state. Once the battery is completely charged, all LEDs of the battery charge indicator are permanently lit.

  • Page 24: Displaying The Charge State

    Operation Displaying the charge state - Press and hold the ON/OFF switch . The screwdriver starts to rotate and the battery charge indicator shows the current charge state of the integrated battery: • Red: battery discharged, recharging required • Red/yellow: battery partially charged •...
  • Page 25 Operation 4. Insert the desired bit into the bit holder. The bit is inserted.

  • Page 26: Turning The Device On And Off

    Operation Turning the device on and off The device features an LED work light . This lights up when pressing the ON/OFF switch 1. Press the ON/OFF switch to turn the device on. 2. Let go of the ON/OFF switch to turn the device off.

  • Page 27: Left/Right Rotation Switch And Switch Lock

    Operation Left/right rotation switch and switch lock The rotational direction of the device can be set with the left/right rotation switch and the switch lock - Slide the left/right rotation switch to the left. The device rotates clockwise. - Slide the left/right rotation switch to the right. The device rotates counter-clockwise.

  • Page 28: Setting The Torque

    Operation Setting the torque The torque can be adapted to the hardness of the workpiece with the torque selector . 1 is the lowest and 6 the highest torque setting. When set correctly, the slip clutch engages when the screw head is level with the workpiece.

  • Page 29: Using As A Cordless Screwdriver/Straight Screwdriver

    Operation Using as a cordless screwdriver/straight screwdriver The device features a foldable hand grip. It allows you to convert the device into a straight screwdriver. The better reach of the straight screwdriver makes it easier to work on hard-to-reach screws. 1.

  • Page 30: Useful Work Tips

    Operation Useful work tips The following information helps you to achieve the best possible results when working with the device: - It allows you to screw threaded screws into soft woods without pre-drilling. For other woods, we recommend pre- drilling the hole, especially in the case of large screw diameters.

  • Page 31: Using The Led Lamp

    Operation Using the LED lamp NOTE! Risk of damage! Attempting to open the lamp by twisting can damage the device. - The LED lamp is maintenance-free and cannot be opened or adjusted by twisting. - Press on the lamp glass on the bottom of the hand grip turn the LED lamp on.

  • Page 32: Inspection

    Inspection Inspection Regularly check the state of the device. - Check the operating controls for damage. - Check that the accessories are in perfect condition. Do not operate a damaged device or accessory. Have the damaged device or accessory checked and repaired by an authorised service centre.

  • Page 33: Troubleshooting

    If the problem persists, contact the customer service listed on the last page. Technical data Model number: S019 Item number: 806696 Battery specifications: 3.6 V/2.0 Ah lithium-ion battery Rotational speed: 230 rpm Bit support: 6.35 mm (1/4") hex...
  • Page 34 Technical data Correction value K: 1.5 m/s Scope of delivery bit set: 54 bits, 25 mm CRV 3 x PH0, 3 x PH1, 3 x PH2, 3 x PH3, 2 x PZ0, 2 x PZ1, 2 x PZ2, 2 x PZ3, 2 x SL3, 2 x SL4, 2 x SL5, 2 x SL6, 2 x SL7, 2 x H3, 2 x H4, 2 x H5, 2 x H6, 2 x T8, 2 x T10, 2 x T15, 2 x T20, 2 x T25, 2 x T27, 2 x...
  • Page 35 Technical data Try to keep the exposure to vibrations and noise as low as possible. Examples of measures to reduce the exposure: - wearing vibration-damping gloves while using the tool; - limiting the working time; - using accessories in good condition; - regular maintenance and cleaning of the device;...

  • Page 36: Declaration Of Conformity

    Original EU Declaration of Conformity MEROTEC GmbH Otto-Brenner-Str. 8, D-47877 Willich, Germany herewith declare under our own, sole responsibility that our product 3.6 V Cordless screwdriver Model no. S019 complies with the following directives: 2006/42/EC Machinery Directive 2014/35/EU Low Voltage Directive 2014/30/EU EMC-Directive...
  • Page 37 Otto-Brenner-Str. 8, D-47877 Willich, Germany herewith declare under our own, sole responsibility that our product 3.6 V Cordless screwdriver Model no. S019 complies with the following directives: Supply of Machinery (Safety) Regulations 2008 Electrical Equipment (Safety) Regulations 1994 Electromagnetic Compatibility Regulations 2016...

  • Page 38: Disposal

    Disposal Disposal Disposing of packaging Dispose of packaging according to type. Sort the paperboard and cardboard as waste paper and the film as recyclable material. Dispose of old electrical device This symbol indicates that this product may not be disposed of together with domestic waste in compliance with the (2012/19/EU) Regulation pertaining to waste electrical and electronic devices (WEEE).
  • Page 39 Disposal * marked with: Cd = Cadmium, Hg = Mercury, Pb = Lead, Li = Lithium.

This manual is also suitable for:

806696

Table of Contents

Save PDF