Phase 2 - Priming; Phase 5 - Cleaning - Rainbow Treecare Q-gun Manual

3.
Place the injection tip into the neck of the
bottle.
V.
CLEANING
1.
70% isopropyl
alcohol
+
ONE PART
Fill the empty q-gun bottle 1/3 to 1/2 way with a dilute isopropyl
alcohol cleaning solution. To make a cleaning solution, mix ONE (1)
part 70% isopropyl alcohol to TWO (2) parts water.
NOTE:
For 90% isopropyl alcohol, mix ONE (1) part alcohol to THREE (3) parts water.
3.
Repeat Phase IV. PURGING
cleaning solution into the Q-gun bottle. Dispose
of pesticide wastes and rinsate in accordance
with the product label and local, state, and
federal regulations.
4.
Squeeze the handle, dispensing product
back into the bottle. Repeat until the
system is empty.
Water
=
Cleaning Solution
TWO PARTS
to discharge the
2.
Repeat
solution through the system.
4.
See MAINTENANCE & REPAIR
further cleaning instructions.
5.
Return unused
product to an
approved pesticide
container.
Phase II. PRIMING to cycle cleaning
5.
for
Always store the Q-gun
system clean and dry.
5