Page 1
PREPARATION STEP 1 Crossbar Mounting Hole Mirror with Quoizel recommends 2 people for each step. Backing Place the Mirror Frame onto a flat working surface with the back facing you. Carefully locate the Mirror with Backing onto the Mirror Frame.
Page 2
ASSEMBLY INSTRUCTIONS STYLE NUMBER JA43225PN, JA43225BN FOR VERTICAL STEP 2 Lift and position where the Mirror will reside on the wall surface and with a tape measure, mark distance from floor to the bottom edge of the frame with a pencil. Mark should be located at a point representing ½...
Page 3
ASSEMBLY INSTRUCTIONS STYLE NUMBER JA43225PN, JA43225BN FOR HORIZONTAL STEP 6 Top Crossbar Lift and position where the Mirror will reside on the wall surface and with a tape measure, mark distance from floor 6” to the bottom edge of the frame with a pencil. Mark should be located at a point representing ½...