Installation - Black Box WMD-1075FAN-U User Manual

WMD-1075FAN-U

INSTALLATION

The Fan assembly can be installed in the wall mount cabinet in any one of the four possible mounting locations. See
illustration below.
After you select the vent opening for the fan assembly in the cabinet, use the hardware supplied and follow the M6
screw and nut installation.
Finally, use the two blanking plates and hardware and select which two of the three vents you wish to block. This will
leave you with one empty vent to pull air into the cabinet.
4
Fan Assembly
M6 Nut
1.877.877.2269 BLACKBOX.COM
Blank Plate
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
M6 Screw