Table of Contents
Advertisement
RM386-220V
INSTALLATION NOTES
Remove the two fan knockouts on the top of the cabinet by pushing down on one side and then twisting back
1.
and forth until the tabs break off.
Hold the fan assembly up to the inside of the top of the cabinet so that the mounting holes in the fans match up
2.
with the mounting holes in the top of the cabinet. Make sure that the fan power cord receptacle is facing the rear
of the cabinet.
Place the two fan guards included with the product over the mounting holes in the top of the cabinet.
3.
Insert the eight #8-32unc screws down through the fan guards and top of the cabinet and into the fan assembly.
4.
Connect the fan to power with a user-supplied power cord.
5.
4
FIGURE 1-1: INSTALLATION
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
Advertisement
Table of Contents
