SPEL Smart4house RE-00 Series Installation And Operating Instructions Manual

Wi-fi relay

Hide thumbs Also See for Smart4house RE-00 Series:

Installation and operating instructions manual (18 pages)

page of 18

/ 18
Bookmarks

Quick Links

Download this manual

Version for Smart phones and tablets with ANDROID operating system

Description of the Wi-Fi relay

A member of the Smart4house product family, the Wi-Fi relay is designed for remote control of

one or more devices with inputs for potential-free contacts, viz. via the Smart4house application

in your smartphone or tablet. Requests for output relay connection/disconnection are

transmitted from the smartphone/tablet to the cloud, from where they are transmitted to the Wi-

Fi relay through your AP – Access Point and the Wi-Fi 802.11b/g/n network. The same path is

then used by the Wi-Fi relay to send information about implementation of the request. The Wi-Fi

relay is equipped with a pair of output relays with switching contacts. The output relay status is

indicated by LED controls. The output relay either may be operated in the on/off mode or a 1-

second switch-on pulse may be generated. The information transmitted is secured by

encryption.

Two Wi-Fi relay versions differing in their power supply are marketed:

a) Model S4H-RE-00:

a) Model S4H-RE--10:

Note: The source for powering from USB is not included in the delivery.

Installation manual

Fasten Wi-Fi relay 1 to a dry, smooth and firm surface with 2 screws and wall plugs (included in

the delivery) or with a double-sided adhesive tape. To access the holes for the screws, remove

cover 2 by sliding it in the direction of the arrow. Connect the device to be controlled to the Wi-Fi

relay via screw terminals in terminal box 3.

Wi-Fi relay electronics include components which are susceptible to

electrostatic charge. Do not touch any component except the terminal box

screws and the initialising button when installing the product.

S4H-RE-00, S4H-RE-10

Home in your hands

Wi-Fi Relay

Models S4H-RE-00, S4H-RE-10

Installation and Operating Instructions

powered with 5 VDC from a Micro B USB

powered from a 12-24 V AC/DC supply

Need help?

Do you have a question about the Smart4house RE-00 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for SPEL Smart4house RE-00 Series

Page 1 Home in your hands Wi-Fi Relay Models S4H-RE-00, S4H-RE-10 Installation and Operating Instructions Version for Smart phones and tablets with ANDROID operating system Description of the Wi-Fi relay A member of the Smart4house product family, the Wi-Fi relay is designed for remote control of one or more devices with inputs for potential-free contacts, viz.
Page 2 S4H-RE-00 S4H-RE-10 The Wi-Fi relay must be located within the reach of the AP/router (Access Point) signal with which the relay will communicate and to which it will be configured. Test the AP signal quality in the future Wi-Fi relay location on the Wi-Fi communication screen of your smartphone/tablet. The Wi-Fi relay should be located at a well accessible site for easy initialisation, in areas with no water vapour condensation, temperature 0°C to 50°C (32°F to 122°F).
Page 3 Connect the devices to the Wi-Fi relay via terminal box 3. RE-00 Connect the external 5 VDC power supply to the relay via Micro B USB and plug the supply to the RE-10 network Connect the 12 – 24 V AC/DC power supply voltage to terminal box 4, terminals 9-10. The output relays are fitted with break-make contacts: NO means that the contact is open in the rest state.
Page 4 Label on the removable cover. The MAC address is highlighted in red here. The terminal box and the battery polarity are also identified. Adding the sensor in the Smart4house application with the ANDROID operating system Start the application and proceed by following these instructions: 3.2.a.
Page 5 3.2.c. Enter the name of your WiFi relay into the Device Name window – best use a name according to the sensor location (e.g. bathroom, pool, garage …), then enter the sensor MAC address into the MAC Address window (refer to Section 3.1) and click Save.
Page 6 3.4. Wi-Fi relay initiation LED 1 – orange, indicates closing of Re1 (first relay) LED 2 – orange, indicates closing of Re2 (second relay) LED 3 – multicolour (red, orange, green), its illumination/colour indicate the relay initialisation steps and Wi-Fi relay connection status during use Tl 1 –...
Page 7 3.4.b. Press Send to device to send the data for WiFi relay initialization to your AP/router. The data must be sent while the red LED 3 on the sensor illuminates red. Connection of the Wi-Fi relay to your Smartphone/tablet is indicated by LED 3 flashing red.
Page 8 LED 3 lights during RE initialization: Using the Smart4house application 4.1. WiFi relay detail, Output activation 4.1.a. If the WiFi relay has been initiated (initialization confirmed by notification and subsequent status change), you can access the WiFi relay details by pressing (briefly) the window with the device in question.
Page 9 4.2. Settings 4.2.a. In this screen you can allow controlling of second relay or choose mode of corresponding relay. In the Pulse mode the relay generates a 1-second pulse on pressing the activation button on screen. Activated tab is highlighted by bold blue line. Note: The relay must be off to be switched to the pulse mode.
Page 10 4.3. Message history 4.3.a. Open this screen to view the control history and current status of the outputs. The pulse generation time is displayed if the output is in the pulse mode. 4.4. Editing the WiFi relay 4.4.a. To edit the WiFi relay data (name and MAC address), first initiate the procedure by long pressing of the window with the sensor in question on the MENU screen.
Page 11 4.4.c. The editing window will appear. Enter the new data and save them by clicking on the Save button. 4.5. Reconfiguring WiFi 4.5.a. Open the action menu by long pressing of the window with the sensor in question. Then select the Wifi Configuration option. Now proceed as described in Section 3.3.
Page 12 5.a. In the main menu, select Email messaging. 5.b. If you want messages to be sent to Email, check Email Messaging and save by pressing Save. If you want to remove E-mail address from the cloud, press Remove email. Pressing Remove email will get you to the following screen 5.c. Note: Button Choose device is showed only if the Email Messaging is allowed.
Page 13 5.d. In this screen you can enable / disable sending email messages for each device separately. 6. WiFi relay control from more that one Smartphone If wifi relay is configured you don’t have to configure it again when you are adding it to another mobile device.
Page 14 Symbols and messages Wi-Fi relay symbol Relay ON symbol Relay OFF symbol Symbol for switching the Wi-Fi relay to the pulse mode / information on pulse generation on the overview screen. The pulse duration is 1 second. Backlit control button showing the current status of the relay in question. This symbol shows that the relay is OFF.
Page 15 8.1. When the application is running on foreground, notification will be displayed for 3 sec. . When the App is on background, notification will be displayed on the screen until you open the app. If Emai notifications are allowed, you will get Email on selected address. Example: Application Smart4house send you this notification: Relay Switch RECONNECTED.
Page 16 In case of any trouble contact the manufacturer at www.smart4house.net 13.a. Technical data: Wi-Fi relay model S4H-RE-00, USB power supply SPEL a.s., Třídvorská 1402, 280 00 Kolín, Czech Republic Manufactured by: Size: 90 x 103 x 21 mm (3.54 x 4.06 x 0.82 in) Weight: 90 g (3.6 oz.)
Page 17 Note: The control relay contacts may be included in PELV/SELV class circuits only. 12. b. Technical data: Wi-Fi relay model S4H-RE-10, 12 – 24 V AC/DC power supply SPEL a.s., Třídvorská 1402, 280 00 Kolín, Czech Republic Manufactured by: Size: 90 x 103 x 21 mm (3.54 x 4.06 x 0.82 in)
Page 18 Standards and certification The Wi-Fi relay complies with the requirements of: EN 300 328 V1.7.1 EN 301 489-1, V1.8.1; EN 301 489-17, V1.3.2 EN 60950-1 EN 61 000-4-3 ed.3:2006 +A1 +A2 EN 61 000-4-4 ed.2:2005 +A1 EN 61 000-4-6 ed.3:2009 EN 55 022 ed.3: 2011 Art.

This manual is also suitable for:

Smart4house s4h-re-00 Smart4house s4h-re-10