Removing the side panels and hood ......................3 Removing the OEM front bumper ........................4 Removing the rivets ............................7 Installing the B-PWR front bumper ........................8 Reinstalling the hood and side panels ......................11 Installation Manual PAFB-1C Mountain Front Bumper with Skid Plate (Axys)
SERIOUS INJURIES. B-PWR and all its affiliated companies, as well as its suppliers and distributors, are not responsible for any consequences whatsoever resulting from a poor installation or an improper use of the product.
There is a risk of being crushed under inappropriately positioned lifting equipment. Never place any part of your body under a vehicle that has not been properly installed and secured. Installation Manual PAFB-1C Mountain Front Bumper with Skid Plate (Axys) Page | 2...
Unscrew the two Torx bolts on each side (Figures 9 and 10) and set aside. 5.4. Remove the spare belt bracket (Figure 11). 5.5. Remove the bumper. 5.6. (Figure 5) (Figure 6) Installation Manual PAFB-1C Mountain Front Bumper with Skid Plate (Axys) Page | 4...
Remove the two rivets on each side (Figures 12 and 13). 6.3. Remove the two rivets under the snowmobile (Figure 14). (Figure 12) (Figure 13) (Figure 14) Installation Manual PAFB-1C Mountain Front Bumper with Skid Plate (Axys) Page | 7...
7. Installing the B-PWR front bumper 7.2. Install the B-PWR bumper where the OEM bumper used to be (Figure 15). 7.3. Secure the bumper using the two Torx bolts set aside in step 3.3 (Figures 16 and 17). 7.4. Screw in place using the bolts set aside in step 3.2 (Figures 18 and 19).
Plug the connector back in (Figure 25). 8.3. Reinstall the hood (Figure 26). 8.4. Reinstall the side panels (Figures 27 and 28). (Figure 26) (Figure 25) (Figure 27) (Figure 28) Installation Manual PAFB-1C Mountain Front Bumper with Skid Plate (Axys) Page | 11...