1. Manuals
  2. Brands
  3. Barberan Manuals
  4. Industrial Equipment
  5. RP-30-FM1
  6. Instruction manual

Barberan RP-30-FM1 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

MACHINE Mod.:
RP-30-FM1
MACHINE No.:
12822
CUSTOMER:
GLOBAL EDGE
Pol. Ind. Camí Ral, C/ Galileo 3-9
08860 Castelldefels, Barcelona - España
Tel.: (34) 93 635 0810 - Fax: (34) 93 636 1555
barberan@barberan.com - www.barberan.com
MAQUINARIA PARA EL ACABADO DE SUPERFICIES / MACHINERY FOR FINISHING SYSTEMS

Advertisement

Table of Contents
loading

Related Manuals for Barberan RP-30-FM1

Summary of Contents for Barberan RP-30-FM1

  • Page 1 CUSTOMER: GLOBAL EDGE Pol. Ind. Camí Ral, C/ Galileo 3-9 08860 Castelldefels, Barcelona - España Tel.: (34) 93 635 0810 - Fax: (34) 93 636 1555 barberan@barberan.com - www.barberan.com MAQUINARIA PARA EL ACABADO DE SUPERFICIES / MACHINERY FOR FINISHING SYSTEMS...
  • Page 2 DESCRIPTION Special machine for the continuous application of paper foils, PVC or similar materials upon profiles made of wood, chipboard, aluminium, rigid PVC, etc. using solvent based polyurethane glues. The machine is equipped with a hot melt head which is applied upon wooden veneer sheets or paper foil or veneer in spool.

  • Page 3: Technical Characteristics

    TECHNICAL CHARACTERISTICS Maximum veneer width..............280 mm Minimum veneer width.................40 mm Maximum diameter of the foil spool ...........600 mm Normal diameter of the spool cones ............76 mm Capacity of the polyurethane glue head ..........4 dm3 Maximum temperature of the evaporation tunnel ........80ºC Aspiration diameter of the evaporation tunnel ........100 mm Maximum temperature of the hot melt glue ..........220°C Maximum profile width...............280 mm...
  • Page 4 NORMAL POSITIONING CONDITIONS The positioning of this machine must be realised in a closed site. The floor must be horizontal, flat and non sliding. Good light conditions and an atmospheric air circulation which guaranties more than 5 air renovations per hour must be available.
  • Page 5 When the production of a profile type is over or when the profiles or veneer strips are empty, the feeding will be interrupted in order to fit the machine again to continue the production. In order to reduce the stopping times, one operator can control the waste of veneer sheets/ foil and glue and have a new spool and new glue ready to be replaced in the machine.
  • Page 6 through the cable guide of the electric box and connect the connections R S T and neutral. The door of the electric cabinet can only be opened with the general switch at "0" position. Check that the tension and frequency of the net coincides with the indicated in the electric scheme.

  • Page 7: Installation

    INSTALLATION Before the commissioning of the machine following operations have to be done first : - Remove the anti-oxidising protection and grease all those parts which are not painted. - Check the oil level of the speed variators. - Situate the profile to be wrapped between the infeed guide wheels of the machine with the main zone to be wrapped at the upper part and approximately centred with the wheels.
  • Page 8 base progressively in order not to get folds or breakage on the foil and that it adapts himself perfectly to the shape of the profile. In order to realise this operation of individual adjustment of the pressure rollers it is necessary to use the manual buttons of "slow forward" and " slow backward"...
  • Page 9 - In order to facilitate the introduction of the foil through the inside of the evaporation tunnel, the cover of the tunnel can be opened to the rear and pass the foil manually or whether with closed tunnel hold the beginning of the foil with a magnetic piece upon the metallic bar which moves to the exit turning a handwheel.
  • Page 10 COMMISSIONING OF THE MACHINE WIT PU HEAD - Check that the emergency stop buttons are unblocked and that the security stop cable is tensioned. - Check in the manometer the arrival of compressed air. - Check that the pressure of the compressed air to the elements which are to be used is adequate.

  • Page 11: Periodical Maintenance

    The length of the veneer to be wrapped must be a few greater than the length of the profile in order to avoid that the pressure rollers becomes dirty. The adjustment of the veneer infeed respect to the profile is adjusted through 2 time switches which are incorporated in the control board.
  • Page 12 - VACTRA 2 MOBIL - TONNA T68 SHELL - MACCURAT 68 - GUIA 2 REPSOL - RENEP 2 FUCHS - RENEP 3 FUCHS - SIL GUIAS H-100 EP b) Slow displacement guides and spindles.(*) - LAMORA D220 KLÜBER - FEBIS K68 ESSO - VACTRA 4 MOBIL...

  • Page 13: Sound Level

    High temperature guides and spindles (up to 260º C)(**) - BARRIERTA L55/1 KLÜBER - BARRIERTA L55/2 KLÜBER Hydraulic circuits - LAMORA HLP 68 KLÜBER - RENOLIN B-520 FUCHS - SIL POWER HV-32 k) THERMIC OIL - THERMISOL HT 200 FUCHS - SILTERMIC ( * ) THE GREASING FREQUENCY IS ONCE A MONTH ( ** ) THE GREASING FREQUENCY IS ONCE A WEEK...

  • Page 14: Security Systems

    The sound level of continuous pressure equivalent measurement A for the working point of the machine RP-30-FM is : 75 dB The maximal value of acoustic pressure instantaneous measured A is : 82 dB The measurements have been realised in normal working conditions of the machine.

  • Page 15: Emergency Buttons

    To open the electric cabinet it is necessary that the main switch is in "off" position. In the "on" position the door of the electric cabinet remains closed. This do not allow to manipulate inside the cabinet when the tension is connected. EMERGENCY BUTTONS There are emergency buttons to order the full stop of the mechanisms in operation.
  • Page 16 LAMINATION ROLLERS AND WHEELS The positioning of the rollers must be done stopping first the conveyor wheels. Introduce the profile on the conveyor wheels and, once the stop is assured through switching off the main switch, begin the positioning of the lamination rollers and wheels.
  • Page 17 ZONES OF HIGH TEMPERATURE For the manufacturing process it is required the glue fusion head and several accessories for the heating of profiles or wrapping material where some high temperature zones. They are located at : a) Hot melt fusion tank It is wrapped with an isolating protection.
  • Page 18 THIS SYMBOL WARNS ABOUT THE REQUIREMENT OF SPECIAL ATTENTION TO GENERAL SECURITY POINTS. The operator must have the necessary information and practical training hours to use the machine without supervision. Examine carefully the working zones which could be dangerous in order to detect them rapidly.
  • Page 19 TEMPERATURE CONTROLLER “ERO” ERO ELECTRONIC ºC ºF SMRT INDEX: - Foreword. - 1. Introduction. - 2. Basic functions. - 3. Configuration. - General configuration notes. - Configuration. - Configuration data. - Operative mode. - 4. Connection.

  • Page 20: Basic Functions

    - FOREWORD: This manual has been designed to be used as a rapid guide for the operators which have to work with the new Temperature Controller ERO. So we will be able to teach the operation and the fast comprehension of the steps to configure the controller and use it.
  • Page 21 3. CONFIGURATION: The configuration of the temperature controller is based on two different phases. The first phase is the configuration of the instrument by means of the Configuration Data (these data are detailed at the lower list). Once the data have been introduced at the controller, enter the parameters of the Operative mode.
  • Page 22 b- Configuration: Before starting the configuration of the controller, we just have to lose the screw at the front of the instrument, extract it and we would be able to put the switch V2 in open position (see drawing). switch ope n switch close d Once the switch is open reinsert the instrument inside its box and connect it.
  • Page 23 - Configuration data: Following values are the ones that we have to introduce in the controller for configuring it, when it works as application roller. Entering types and standard scale. Initial entering value. Scale ground value. Output configuration. Heatling output type Alarm1, application roller starting temperature.
  • Page 24 In case it works as Extruder, the parameters are the following : Input types and standard scale Initial input value. Scale ground value. Output configuration. Heating output type. Alarm 1 temperature keeping Alarm 1 operative mode. SP2. Alarm 2 Extruder motor starting temperature Alarm 2 operative mode Inhibit Alarm 2.
  • Page 25 When you finish the configuration of all parameters, proceed as follows : 1. Go to the parameter P18 and enter the key number 5000 to block the function parameters which will be adjusted later. Then push the key “ FUNC “.
  • Page 26 Alarm 2 relay action Enable STAND BY of alarm 2 Offset value Application roller “according to machine” Offset value Extruder Offset value Display of protected parameters Manual function Smart; Authorisation / invalidation Max. Programmable proportional value for the smart function Min.
  • Page 27 The auxiliar configuration will be complete and the instrument shows Cnf on the upper indicator. 2 Disconnect then the instrument and extract it again to place the internal switch V2 in closed position. 3 Insert the instrument again and connect it. 4 Once the instrument is connected enter the operation parameters.
  • Page 28 - Operative mode: Following table shows the values that have to be introduced in the controller, when it works as application roller. Adjustable Set Point. (working port). “ Access key to the parameters “ Limit of alarm 1. HSA1 0.1 Hysteresis of alarm 1.
  • Page 29 OLH is the percentage of time respect the cycle where the output relay is closed when the heating is performed. For example if we have fixed C=100 and OLH=65, that means that when a heating is performed, from each 100 seconds, 65 seconds long will be the heating elements ON, and 35 seconds long OFF (so it will heat at 65% power).

  • Page 30: Variable Parameters

    4º CONNECTION: Here will be explained how to connect the instrument. 5 VARIABLE PARAMETERS: RP-15 : -P23 -Cy1 -OLH RP-30 : -P23 -Cy1 -OLH RP-30/PUR : -P23 -Cy1 -OLH PL-32 : -P23 -Cy1 -OLH PL-45 : -P23 -Cy1 -OLH EXTRUDER : -P23 -Cy1 -OLH...

  • Page 31: Temperature Controller

    DISPLAY TEMPERATURE CONTROLLER ELECTRONICS LFS ERO ELECTRONIC ºC ºF SMRT Real temperature Programmed temperature Key ìFUNCî FUNCTION. Key ìMANî BACK Key INCREASE key DECREASE Extraction screw LED ìOUT 1îMain relay LED ìOUT 2î ALARM 1. LED ìOUT 3î ALARM 2. LED ìSMRTî...
  • Page 32 TEMPERATURE REGULATION OF THE APPLICATION HEAD ERO ELECTRONIC ºC ºF SMRT FUNCTION Put on the main switch : The temperature regulator remains on and the actual temperature of the application head appears on the display (A). The display (B) indicates the programmed temperature to be reached and maintained by the application head.
  • Page 33 TEMPERATURE REGULATION OF THE APPLICATION HEAD ERO ELECTRONIC ºC ºF SMRT In order to know the temperature that the start of the application roller was programmed, it is necessary to push the key ìFUNCî (C) until the indicator A1 on the display (A).
  • Page 34 TEMPERATURE REGULATION OF THE APPLICATION HEAD ERO ELECTRONIC ºC ºF SMRT In order to know the temperature that the STOP of the application roller was programmed, it is necessary to push the key ìFUNCî (C) until the indicator A2 on the display (A).
  • Page 35 TEMPERATURE REGULATION OF THE APPLICATION HEAD ERO ELECTRONIC ºC ºF SMRT In order to know the programmed application temperature, please read the value on the display (B). The recommended value for this temperature is the same as the application temperature recommended by the glue manufacturer.

  • Page 36: Operation

    TEMPERATURE REGULATION OF THE GLUE FEEDER (EXTRUDER) OPERATION: For the glue feeding it is necessary that the switches are in following position : Glue temperature ------ Position (ON). Application roller ------ Position (ON). Glue feeder ------ Position (ON). In order that the glue feeder works it is necessary that the application roller is turning. In this case there are two options: A.- Glue level in application head indicating FULL: In this case the heating elements will be switched on automatically until the temperature...
  • Page 37 TEMPERATURE REGULATION OF THE GLUE FEEDER (EXTRUDER) ERO ELECTRONIC ºC ºF SMRT PROGRAMMATION OF THE MAINTENANCE TEMPERATURE In order to know the programmed value, please press the key FUNC (C) until the indicator A1 appears on the display (A). The LED Alarm 1 (I) will burn and on the display (B) will appear the maintenance temperature of the EXTRUDER.
  • Page 38 TEMPERATURE REGULATION OF THE GLUE FEEDER (EXTRUDER) ERO ELECTRONIC ºC ºF SMRT PROGRAMMING OF THE TEMPERATURE FOR SPINDLE MOTOR START The starting of the spindle motor must be done at a temperature where the glue is fluid enough. This temperature can be in all cases the application temperature recommended by the glue manufacturer.
  • Page 39 TEMPERATURE REGULATION OF THE GLUE FEEDER (EXTRUDER) ERO ELECTRONIC ºC ºF SMRT EXTRUDER FUSION TEMPERATURE PROGRAMMING In order to know the programmed glue melter temperature read the value that appears on the main screen together with the real temperature. The recommended value is 110% of the application temperature of the glue. For example: If the application temperature is 190∫C, the temperature to be programmed for the extruder melter 190x1,1 = 209∫C.
  • Page 40 12822 / 18 12822 / 17 12822 / 16 12822 / 19 12822 / 7 12822 / 6 12822 / 4 12822 / 13 12822 / 12 12822 / 20 12822 / 15 12822 / 10 12822 / 8 12822 / 5 12822 / 3 12822 / 14 12822 / 9...
  • Page 41 BULLONE RP-560.014 BULLONE RP-560.013 PLS-280.001 AXLE GUIDE PL-289.150I PL-289.150D GUIDE POS. REF. DENOMINATION El plano es de nuestra propiedad intelectual. The drawing is our intellectual property Toda comercialización, duplicación o comunicación no autorizada a terceros será san- Unauthorized commercialization,duplication or communication to third parties will be cionada de acuerdo con la ley y generará...
  • Page 42 O-RING PS-12 x 18 x 0,5 DIN-988 SPRING O-RING B-25 x 12,2 x 0,9 DIN-2093 WHEEL REGULATION SCREW PL-201.018 DIN-1481 FIXING COVER PL-201.014 INNER BUSHING PL-201.013 SPIRAL CHAPED STICK PL-201.051 WHEEL GUIDE KEY (Left) PL-201.016 WHEEL GUIDE KEY (Right) PL-201.017 ALLEN SCREW M.
  • Page 43 DIN-988 O-RING PS-12 x 18 x 0,5 DIN-2093 SPRING O-RING B-25 x 12,2 x 0,9 PL-201.018 WHEEL REGULATION SCREW DIN-1481 PL-201.014 FIXING COVER PL-201.013 INNER BUSHING PL-201.051 SPIRAL SHAPED STICK PL-201.016 WHEEL GUIDE KEY PL-201.017 WHEEL GUIDE KEY DIN-912 ALLEN SCREW M. 6 x 30 PL-200.003 TRANSMISSION SPINDLE D.
  • Page 44 O-RING PS-12 x 18 x 0,5 DIN-988 SPRING O-RING B-25 x 12,2 x 0,9 DIN-2093 WHEEL REGULATION SCREW PL-201.018 DIN-1481 FIXING COVER PL-201.014 INNER BUSHING PL-201.013 SPIRAL SHAPED STICK PL-201.051 PL-201.016 WHEEL GUIDE KEY PL-201.017 WHEEL GUIDE KEY ALLEN SCREW M. 6 x 30 DIN-912 TRANSMISSION SPINDLE D.
  • Page 45 DIN-988 O-RING PS-12 x 18 x 0,5 DIN-2093 SPRING O-RING B-25 x 12,2 x 0,9 PL-201.018 WHEEL REGULATION SCREW DIN-1481 PL-201.014 FIXING COVER PL-201.013 INNER BUSHING PL-201.051 SPIRAL SHAPED STICK PL-201.016 WHEEL GUIDE KEY PL-201.017 WHEEL GUIDE KEY ALLEN SCREW M. 6 x 30 DIN-912 TRANSMISSION SPINDLE D.
  • Page 46 FIXACION KNOB RM-500.041 BUSHING GLY-PBG-121412-F PLZ-256.002 SPINDLE SFT-20 RHP SUPPORT Cod.: 175.366 BRUSH Ø. 140 x Ø 50 x 100 Cod.: 175.372 BRUSH Ø. 140 x Ø 50 x 60 PL-262.400 AXLE PLX-262.100 EXHAUSTION HOOD Cod.: 172.288 MOTOR 0,37 kW 1000 r.p.m.
  • Page 47 RP-560.013 FIXING BOLT RP-560.014 SUPPORT RPZ-291.002 AXLE RP-560.030 RPZ-291.001 SUPPORT FELT 110 x 60 x 15 Cod.: 253.603 TUBE Cod.: 8.023 SHUTING TAP FOR PUNCH Cod.: 222.398 TANK Cod.: 222.399 POS. DENOMINATION REF. El plano es de nuestra propiedad intelectual. The drawing is our intellectual property Unauthorized commercialization,duplication or communication to third parties will be Toda comercialización, duplicación o comunicación no autorizada a terceros será...
  • Page 48 SCREEN SUPPORT IMR1 IMR1-100.100 SCREEN IMR-020 /1 IMR1-100.000 IRK 1000 W LAMP Cod.: 9.556 13713Z-98PHIL POS. REF. DENOMINATION El plano es de nuestra propiedad intelectual. The drawing is our intellectual property Unauthorized commercialization,duplication or communication to third parties will be Toda comercialización, duplicación o comunicación no autorizada a terceros será...
  • Page 49 14 15 PNEUMATIC BRAKE Cod.: 222.335 SUPPORT PL-420.017 SUPPORT PL-420.018 BUSHING GLY-PXG 325401.5 SUPPORT RPZ-445.009 KOVER PL-420.019 AXLE RPZ-445.010 AXLE RPZ-445.011 BEARING 608 zz BUSHING GLY-PG-323640-F Cod.: 221.285 BRAKE DISK RPZ-445.008 SUPPORT RPZ-445.007 SUPPORT PUR-661.005 ROLLER PUR-660.011 BUSHING GLY-PG-283230-F Cod.: 85.276 ROLLER AXLE PUR-660.100 POS.
  • Page 50 RING OR-12 x 2 Cod.: 78.641 RPX-700.901 LOCK AXLE ( Cod.: 172.211 ) DOCTOR BLADE RP-700.042 RP-700.005 BLADE GUIDE RP-700.043 BULLONE FISSAGGIO RP-700.011 BULLONE FISSAGGIO AXLE RP-700.007 RP-700.011 BULLONE RP-700.043 BULLONE O RING OR VI 25,07 x 2,62 CILINDER 2 CARRERES 32 /20+5 MGN Cod.127864 AXLE PLS-703.007...
  • Page 51 KNOB M-5 x 16 NLM-609 GUIDE BUSHING RP-460.004 FOIL GUIDE ROLLER PL-250.039 HANDRAIL PL-250.015-I ALUMINIUM PLATE BRN-300.024 POSITION INDICATOR PLATE PL-250.014 HANDRAIL PL-250.009 FIXING KNOB RM-500.041 LIMIT OF ELEVATION KNOB PL-250.007 ELEVATION SPINDLE PLZ-256.002 ELEVATION SCREW PLZ-256.001 NLM-643 JACCARD HANDLE Nº3M-10 HANDRAIL PLX-262.002...

  • Page 52: Tool Holder

    TOOL HOLDER RP-560.051 TOOL HOLDER RP-560.052 SCREW TOOL HOLDER DIN-912 ALLEN M-12 x 55 RP-560.054 FIXING BOLT O-RING SCREW DIN-912 CL-100.043 RP-560.002 ALLEN M-10 x 25 El plano es de nuestra propiedad intelectual. The drawing is our intellectual property Unauthorized commercialization,duplication or communication to third parties will be Toda comercialización, duplicación o comunicación no autorizada a terceros será...
  • Page 53 TOOLS 12.822 / 10 BARBERÁN MAQUINARIA PARA EL ACABADO DE SUPERFICIES MACHINERY FOR FINISHING SYSTEMS Ø 50 Ø 50 Axle : Ø 22 x 250 ( RP-560.030 ) Axle : Ø 22 x 250 ( RP-560.030 ) Roller axle : 18 ( RP-500.012 ) Roller axle : 46 ( RP-500.011 ) 80 SHORES Roller : Ø...
  • Page 54 TOOLS 12.822 / 10 BARBERÁN MAQUINARIA PARA EL ACABADO DE SUPERFICIES MACHINERY FOR FINISHING SYSTEMS Ø 80 Ø 80 Axle : Ø 22 x 250 ( RP-560.030 ) Axle : Ø 22 x 250 ( RP-560.030 ) Roller axle : 18 ( RP-500.012 ) Roller axle : 18 ( RP-500.012 ) 40 SHORES 80 SHORES...
  • Page 55 TOOLS 12.822 / 10 BARBERÁN MAQUINARIA PARA EL ACABADO DE SUPERFICIES MACHINERY FOR FINISHING SYSTEMS Ø 50 Ø 79 Axle : Ø 22 x 250 ( RP-560.030 ) Axle : Ø 22 x 300 ( RP-500.040 ) Roller axle : 18 ( RP-500.012 ) Roller : Ø...
  • Page 56 TOOLS 12.822 / 10 BARBERÁN MAQUINARIA PARA EL ACABADO DE SUPERFICIES MACHINERY FOR FINISHING SYSTEMS Ø 50 Ø 50 Axle : Ø 22 x 300 ( RP-500.036 ) Axle : Ø 22 x 300 ( RP-500.036 ) Roller axle : 18 ( RP-500.012 ) Roller axle : 18 ( RP-500.012 ) 40 SHORES Roller : Ø...
  • Page 57 TOOLS 12.822 / 10 BARBERÁN MAQUINARIA PARA EL ACABADO DE SUPERFICIES MACHINERY FOR FINISHING SYSTEMS CURVED AIR NOZZLE RP-560.009 RP-550.091 LEISTER ELECTRON 2A ( Cod.: 8.508 )
  • Page 58 RP-700.030/230 HEATING 1800 W. 230 V. SUPPORT GUIDE RP-560.300 SUPPORT LEISTER RP-560.200 POS. DENOMINATION REF. El plano es de nuestra propiedad intelectual. The drawing is our intellectual property Toda comercialización, duplicación o comunicación no autorizada a terceros será san- Unauthorized commercialization,duplication or communication to third parties will be cionada de acuerdo con la ley y generará...
  • Page 59 HIGH REVOLUTION MOTOR 0,55 kW 12000 rpm PLZ-500.003 TRIMMERS SUPPORT PLZ-501.001 TRIMMER 75 x 20 x 16 1395 /1 FIG-351 PL-550.200 ASPIRATION PL-550.300 SUPPORT PLZ-501.009 SQUERE PLZ-501.002 HEX. NUT PL-201.018 CHARRION GIRO MOTOR PLZ-501.100 ELEVATION COLUMN PLZ-501.008 SPINDLE PLZ-501.006 SPINDLE PLZ-501.007 POS.
  • Page 60 KNOB PUR-520.029 AXLE PUR-520.028 PLZ-250.005 AXLE ROLLER ROLLER PLZ-250.004 BEARING 6205 ZZ KNOB M-5 x 16 NLM-609 GUIDE BUSHING RP-460.004 FOIL GUIDE ROLLER PL-250.039 HANDRAIL PL-250.015-I ALUMINIUM PLATE BRN-300.024 POSITION INDICATOR PLATE PL-250.014 HANDRAIL PL-250.009 FIXING KNOB RM-500.041 LIMIT OF ELEVATION KNOB PL-250.007 ELEVATION SPINDLE PLZ-256.002...
  • Page 61 05 06 TRANSMISSION SPINDLE PL-200.003 AXLE PROTECTION TUBE PL-200.006 COUPLING RPZ-241.200 EJE TRANSMISION RPZ-241.002 TRANSMISSION SPINDLE PL-200.004 NMRV-075 I=20 REDUCER MOTOR 1,5 kW 1500 r.p.m. PROTECTION TUBE RPZ-241.001 BUSHING RPZ-241.003 TRANSMISSION SPINDLE RPZ-241.100 BEARING 6008 2RS TRANSMISSION BOX FOR WHEEL SUPPORT PL-200.021 O-RING BRN-310.006...
  • Page 62 04 05 RPZ-448.008 RING RING RPZ-448.007 BUSHING GLY-PG-323640-F PUR-660.012 ROLLER EXP. GLY-PG-283220-F BUSHING RING PMZ-400.006 BUSHING PMZ-400.004 Cod.: 94.850 SPRING WASHER 50 x 25.4 x 2 PMZ-400.005 BLOCKING BUSHING ROLLER AXLE S.1386.09.100 POS. REF. DENOMINATION El plano es de nuestra propiedad intelectual. The drawing is our intellectual property Toda comercialización, duplicación o comunicación no autorizada a terceros será...
  • Page 63 PNEUMATIC BRAKE Cod.: 222.335 AXLE RPZ-445.011 BEARING 608 zz BUSHING GLY-PG-323640-F Cod.: 221.285 BRAKE DISK RPZ-446.004 SUPPORT RPZ-445.007 SUPPORT PUR-661.005 ROLLER PUR-660.012 BUSHING GLY-PG-283230-F Cod.: 85.276 ROLLER AXLE PUR-660.100 POS. DENOMINATION REF. El plano es de nuestra propiedad intelectual. The drawing is our intellectual property Unauthorized commercialization,duplication or communication to third parties will be Toda comercialización, duplicación o comunicación no autorizada a terceros será...
  • Page 64 RM-600.011 LEFT HANDLE RM-600.010 PASSING BLADE SHUTING BLADE RM-600.202 RM-600.203 SHUTING BLADE RM-600.009 PASSING BLADE RIGHT HANDLE RM-600.012 RM-600.004 FIXING AXLE HANDRAIL RM-600.005 KNOB M-5 x 16 NLM-609 RM-600.008 FOIL GUIDE BUSHING FOIL GUIDE SHAFT RM-600.006 RM-600.201 LIP FOR GLUE SLIDE GUIDE RM-600.013 JACCARD HANDLE...
  • Page 65 HEATING ELEMENT " M " 2000 W 220 v PL-400.313 CMP-512-2T IMPELLER IMPELLER MOTOR 0,12 kW 3000 r.p.m. B.14 POS. DENOMINATION REF. El plano es de nuestra propiedad intelectual. The drawing is our intellectual property Unauthorized commercialization,duplication or communication to third parties will be Toda comercialización, duplicación o comunicación no autorizada a terceros será...
  • Page 66 GLY-PG-222525F BUSHING FRICTION DISC PXG-223801.5F SENSOR SUPPORT PL-460.014 FIXING BOLT RP-560.013 SHAFT PL-560.002 SUPPORT OF CENTERING ROLLER PL-460.700 REGULATION WHEEL FOR CYLINDER LIMIT PL-461.400 CYLINDER CMW1 32 25 A 1210320025 FEMALE ARTICULATION W0950322003 FEMALE FORK OF ROD GK-M032 W0950322020 BUSGING PL-460.016 VERTICAL SHAFT PL-460.012...
  • Page 67 HERAEUS SCREEN Cod.: 6772 MMS-2000 W POS. DENOMINATION REF. El plano es de nuestra propiedad intelectual. The drawing is our intellectual property Toda comercialización, duplicación o comunicación no autorizada a terceros será san- Unauthorized commercialization,duplication or communication to third parties will be punished according to the law and will be sued for damages.
  • Page 68 RODILLO PRENSOR PRESSURE ROLLER BOBINA BOBINA PRENSOR APROXIMADOR DEL CENTRAJE FOLIO DEL APLICADOR PRENSOR SPOOL SPOOL FOIL CENTERING (HEAD ) (TUNNEL) PRESSURE PRESSURE ROLLER ROLLER FOR APPLICATION APPRACHER ROLLER CLIENTE : ESQUEMA NEUMATICO Nº.: GLOBALEDGE 3355 B A R B E R A N DENOMINACION : FECHA.: Departamento Tecnico...
  • Page 69 CUSTOMER: GLOBAL EDGE Pol. Ind. Camí Ral, C/ Galileo 3-9 08860 Castelldefels, Barcelona - España Tel.: (34) 93 635 0810 - Fax: (34) 93 636 1555 barberan@barberan.com - www.barberan.com MAQUINARIA PARA EL ACABADO DE SUPERFICIES / MACHINERY FOR FINISHING SYSTEMS...

Table of Contents